Polar soft strap polar h1 heart rate sensor polar h2 heart rate sensor user manual.
B3 b2 b1 a1 a2 b4.
E n g l i s h this user manual contains instructions for polar soft strap, and polar h1 and h2 heart rate sensors. The model of your heart rate sensor is printed on the connector. Please follow the pictures on the front and back covers. Heart rate sensor parts 1. The plastic electrode areas on the r...
5. Check that the moist electrode areas are firmly against your skin and that the polar logo of the connector is in a central and upright position. Picture b4. Detach the connector from the strap and rinse the strap under running water after every use. Sweat and moisture may keep the electrodes wet ...
Connector: detach the connector from the strap after every use and dry the connector with a soft towel. Clean the connector with a mild soap and water solution when needed. Never use alcohol or any abrasive material (eg. Steel wool or cleaning chemicals). Strap: rinse the strap under running water a...
Changing battery all connectors have user changeable batteries. To change the battery yourself, follow the instructions below, and see the markings on the connector and pictures on the back cover of this user manual. 1. Lever the battery cover open by using the clip on the strap. Picture c1. 2. Remo...
Precautions for allergy information, see the listed materials in technical specifications. Avoid skin reactions by wearing the heart rate sensor over a shirt, moistened under the electrodes. The combined impact of moisture and intense abrasion may cause a black color to come off the heart rate senso...
C4 c3 c1 c2.
