Polar Electro Transmitter Nike+ User Manual - Polar Wearlink
Polar WearLink
®
+ Transmitter Nike+
This user manual contains instructions for Polar
WearLink+ transmitter Nike+. The transmitter is
compatible with Nike + iPod, Nike+ SportBand
and Polar training computers using 5 kHz data
transfer, such as FT80, FT60, FT40, FT7, FT4,
FS3c, FS2c, RS400, RS300X, RS100, CS400,
CS300, CS200, CS100.
The latest version of this user manual can be
downloaded at
http://www.polar.fi/support
.
For video tutorials, go to
http://www.polar.fi/en/support/video_tutorials
.
Register your Polar product at
http://register.polar.fi
to ensure we can keep
improving our products and services to better
meet your needs.
Follow the pictures on the front cover to see
instructions for using the transmitter.
Transmitter Parts
1.
The electrode areas on the reverse side of
the strap detect heart rate. Picture A1.
2.
The connector sends the heart rate signal to
the iPod nano receiver, Nike+ SportBand or
Polar training computer. Picture A2.
Wear the Transmitter
1.
Wet the electrode areas of the strap under
running water and make sure that they are
well moistened. Picture B1.
2.
Attach the connector to the strap. Adjust
the strap length to fit snugly and
comfortably. Picture B2.
3.
Tie the strap around your chest, just below
the chest muscles, and attach the hook to
the other end of the strap. Picture B3.
4.
Check that the wet electrode areas are
firmly against your skin and that the Polar
E N G L I S H
1