Protek 1006 User Manual - Specifications
The / button moves the signal vertically. Also notice that the channel symbol on
the left side of the display moves in conjunction with the button.
To set up the horizontal system
1. Change the time base.
The or button changes the time base in a 1-2-5 step sequence, and displays
the value in the status bar.
2. Move signal horizontally.
The or button moves displayed signal horizontally on waveform window. It set
the trigger point position.
To set up the trigger system
1. Change the trigger Level
The or button change the trigger level. The trigger level value is displayed at
the top-right of the screen and a line is displayed showing the location of the
trigger level.
2. Change the trigger setup and notice these changes in the status bar.
Press
TRIG
button in the key panel.
Choose one key from F1 to F5 and press it to change function setting.
3. Press 50%
The 50%
button sets the trigger level to the center of the signal.
Specifications
Vertical
Channels
2
Bandwidth
Protek1006: 60MHz
Protek1020: 200MHz
Protek1160: 600MHz
Protek1260: 600MHz
Rise Time
Protek1006: 5.8ns
Protek1020: 1.7ns
Protek1160: 0.58ns
Protek1260: 0.58ns
Input
Impedance
Resistance: 1M;Capacitance: 15pF
Input
Sensitivity
Protek1006: 10mV/div to 5V/div
Protek1020: 2mv/div to 10v/div
Protek1160: 2mv/div to 10v/div
Protek1260: 2mv/div to 10v/div
Input Coupling AC, DC with Ground Level Indicator
Vertical
Resolution
8bits
Memory Depth
32k at single channel; 16k at dual
channel
Maximum
Input
300V(DC+AC Peak)