Proteus VR Labs Ltd Freefly VR Instruction Manual - Setting Up The Freefly Vr
of
7
Page 8 of 12
Page 9 of 12
SETTING UP THE FREEFLY VR
c.
Place your smartphone in the device as shown and align the horizontal axis of
the screen with the lines on the sliders of the Freefly VR;
d.
Push the support arms into the sides of the smartphone;
SETTING UP THE FREEFLY VR
e.
Check that the vertical axis of the phone screen is in line with the
orange line
on the main housing. If not, then loosen the two screws behind, and slide the
device left or right to align. Tighten the screws after aligning.
Step 4: Setup your Smartphone
a.
Adjust the position of the foam blocks to avoid blocking a headphone or USB
port. (Loosen and tighten the screws accordingly);