Proteus VR Labs Ltd GLIDE VR Instruction Manual - Troubleshooting:
Page 16 of 21
Page 17 of 21
TROUBLESHOOTING:
This is a development kit controller, so there are
issues that need some initiative or experimentation
to solve. If you find a solution, or would like aid
in finding a solution, contact support@proteusvr.
com. Thankyou in advance for your understanding
and help!
Ensure the device has charge before use. Charge
the device before use. This gives the controller the
full amount of power required for game play.
If the controls have changed orientation, or the
directional pad appears to move in the wrong di
-
rection, try switching the ‘Game/Key’ mode. If the
problem persists, use an extended paperclip and
press the button opposite.
TROUBLESHOOTING:
If the controller isn’t discovered, turn off your
smartphone’s Bluetooth and turn it on again.
To turn off the controller, simply hold down the
start button until the light goes out. This will hap
-
pen automatically after 5 minutes if not connected
to a Bluetooth device, or 10 minutes of inactivity if
connected to a Bluetooth.
If the device becomes unresponsive there is a pin-
hole reset on the rear of the device. Use an extend
-
ed paperclip and press this button.