Proteus VR Labs Ltd GLIDE VR Instruction Manual - Setting Up Your Glide Vr:
Page 6 of 16
Page 7 of 16
SETTING UP YOUR GLIDE VR:
SETTING UP YOUR GLIDE VR:
Modes
Modes (cont.)
Charging
To charge the
Glide VR
connect it via a USB cable
to suitable charging point. The front facing LED
will flash from red to magenta to indicate that
the device is charging and a solid red to indicate
full charge.
As each app and Smartphone is programmed differ
-
ently. The
Glide VR
button setup can vary between
devices and apps.
VR is an emerging technology; there are no indus-
try standards and Freefly VR cannot control these
differences.
Some trial and error may be required.
For virtual reality applications, ‘Game’ mode will
need to be selected. In this mode the
Glide VR
will
behave as any console controller would. Any cus-
tom button mapping will be accessible within the
game’s settings.
If you want to use the
Glide VR
for other features
not within virtual reality games, ‘Key’ mode will
need to be selected.
For game play the controller can be held in the
horizontal position and be held with both hands
if user desires. This will give optimal game play
experience, allowing the user to control the joy
pad with one hand and the command buttons with
the other.