Protool CHP 26 PLUS Original Instruction - Table of Contents
12
GB
Rotary/chiseling hammer
CHP 26 PLUS – original instruction
Table of contents
1 Symbols
................................... 12
2 Tool
Speci
fi
cations ...................... 12
3 Operating
Controls
..................... 12
4
Notes on Safety Prevention ......... 13
4.1 General Safety Instructions ......... 13
4.2 Work area ................................. 13
4.3 Electrical safety ......................... 13
4.4 Personal safety .......................... 13
4.5 Additional Safety Rules ............... 14
4.6 Machine-speci
fi
c Safety Warnings .. 14
4.7 Noise / Vibration Information ........ 15
5 Application
................................ 15
6 Activation
................................. 15
6.1 Additional handle ....................... 16
6.2 Depth stop ................................ 16
6.3 Switching on/off ........................ 16
6.4 Speed control ............................ 16
6.5 Rotational direction switching ...... 16
6.6 Selecting the modes of operation ... 16
7
Inserting / Removing tools ........... 17
7.1 Inserting tools ........................... 17
7.2 Removing tools
.......................... 17
8 Accessories
............................... 17
8.1 Screw adapter assembly
(accessory) ............................... 17
8.2 Thread chuck ............................ 17
9 Practical
tips
.............................. 17
10 Maintenance
.............................. 18
11 Environmental
Protection
/
Disposal.................................... 18
12 Warranty
.................................. 18
13 Declaration of Conformity ............ 19
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Wear a dust mask!
Read the instructions
Not to be included in municipal refuse
Drilling / Stirring / Screwing
Impact drilling
Positioning the chisel
Chiselling
►
Advice or tip
2 Tool
Speci
fi
cations
Voltage
220 – 230 V
Frequency
50 / 60 Hz
Input power
800 W
No-load speed
0 – 1000 min
–1
Impact rate, max.
4900 min
–1
Impact energy
2.8 J
Right / Left rotation
•
Safety clutch
•
Clamping collar dia.
43 mm
Tool holder
SDS-Plus
Drill dia., max.
Steel
13
mm
Wood
40
mm
Hammer drilling in conctrete
26 mm
Weight 2.9
kg
Protection class
II /
3 Operating
Controls
[1-1] Tool holder
[1-2] Protective anti-dust cover
[1-3] Unlocking sleeve
[1-4] Operation mode switch
[1-5] Revolution regulation switch
[1-6] Locking button
[1-7] Rotation direction switch
[1-8] Additional handle
[1-9] Depth stop
[1-10] Handle – insulated grip
[2-1] Operation mode switch
[3-1] Unlocking sleeve
[3-2] Screw adapter
[3-3] Tool holder
[3-4] Chuck
Not all of the accessories illustrated or de-
scribed are included as standard delivery.