1 owner’s manual rev: 2.50 thank you for purchasing a provari procyon personal vaporizer. We hope you get many years of enjoyment from this device. Www.Provape.Com introduction a personal vaporizer (pv) is a battery-powered device that provides inhaled doses of nicotine by way of a vaporized solutio...
2 table of contents introduction. .................................................................................................................................................. 1 warnings: ..............................................................................................................
3 warnings: ● never abuse your provari procyon - even though it’s made of metal, you can damage it by dropping it. ● have your provari repaired by provape. Do not attempt to repair the unit yourself as damage or personal injury can occur. Any repairs done outside of provape will void the warranty. ●...
4 provari procyon features ● the provari procyon wattage can be adjusted from 3 – 50* in 0.2 watt increments. ● high performance end cap. This new style end cap provides 4x better connection to your batteries resulting in longer run time and overall better performance with no springs to replace. ● f...
5 ● oled brightness adjustment lets you vary the display intensity. ● exclusive reliable and safe electronic switch is designed for long life. ● battery monitoring shuts the unit off once a battery has reached end-of-charge. ● reverse battery protection keeps the circuit safe if the battery is accid...
6 level to 2, 3, 4 or 5 will increase the amount of time the device boosts the power before it drops down to your selected 9 watts. Note that turning the provari up to max wattage and boosting up to 5 will not exceed the maximum output of the unit, which is up to 50 watts. Boost 1 - .25 seconds boos...
7 when you are ready to increase the speed at which the menu items pass by, you can access the scroll speed menu to change this speed. We recommend going to 3 and seeing how that works for you before turning it all the way up to 5. ● the oled brightness adjustment allows you to adjust the brightness...
8 provari procyon components tanks, cartomizers, atomizers, etc. Screw into the front cap (1). Make sure you load these devices with your fluid of choice before attempting to use the provari procyon. The front cap (1) is permanently attached onto the tube (2). Do not attempt to remove it. The button...
9 provari procyon adapter the provari procyon features a standardized thread (p3 thread) which allows the user to easily switch between 510-style threads, ego-type threads and any new hardware equipped with properly designed p3 threads. On the top of the 510 thread we have added coin slots so you ca...
10 battery life when the battery is depleted, the lighted push button on the provari procyon will begin to slowly flash and the device will shut off. At this time recharge the battery. Inserting a battery unscrew the end cap and slide the battery, positive (+) end towards the front of the unit into ...
11 menu flow chart note: menu items can change slightly due to new features or ongoing improvements..
12 screen layout you can enter the main menu by pressing the button 4 times. When the menu appears, you will notice there are several icons and options available to include "a-up", "a-down", "on/off", "rcl", "set", "exit". In the following pages, we will walk you through all of the different icons a...
13 check all screen the check all function allows you to quickly see your basic settings on one screen. When this function is turned on (default) one button press will allow you to see the mode you are in, the current wattage setting, the amount of battery power remaining, and the resistance of your...
14 warning system the procyon has a warning system that alerts you about a problem. Anytime there is an issue that needs attention, this icon will appear on the status screen. Making a correction to fix the problem will automatically reset this warning. If you want to know more details about the war...
15 menu options and functions in this section, we will discuss all the various functions of the provari procyon and what they do. While the provari procyon is a very powerful device and there are a lot of options, you will find that it’s easy to operate and use with a little practice. Press the butt...
16 atomizer up – when selecting this menu item, you will be able to increase the wattage supplied to your atomizer. In this section you will also have access to your battery life, and atomizer ohms reading. Once you have selected the atomizer up option, the first screen you will see will be the watt...
17 rcl (recall) – recall allows you to load a saved profile. A profile consists of all of the unique settings in use at a particular time. This makes it easy to retrieve special settings for different juices or accessories. Later in this manual we will discuss how to save your settings into a profil...
18 set (settings) – in the set menu there are numerous different settings that allow you to customize the function and appearance of the provari procyon. Under the set category you can save a profile, adjust your display brightness, scroll speed, switch between left and right hand display mode, chan...
19 sav (save) – save allows you to save a user specific profile. A profile consists of all of the unique settings in use on the device at a particular time. These user specific settings include: wattage power level boost level setting led color led on/off setting display screen brightness display sc...
20 dis (display) – in the display menu there are numerous different settings that allow you to customize the appearance of the oled display. Under the display option you can adjust your display brightness, scroll speed, switch between left and right hand display mode and change the ontime settings f...
21 scroll speed - this section allows you to adjust the speed of the scrolling menu. When entering this menu area, you will be presented with speed selections 1 through 5. Each time you press the button to select a number, the display will scroll faster or slower depending on what setting you have s...
22 l/r - left or right screen display – this setting changes the orientation of the display. This feature is used to switch the device for use in either the right or left hand. As you select the two options, you will see the display flip from left to right handed mode. In this example, if we were to...
23 led menu - this menu section allows you to turn the led button on and off and lets you change the color of the led button. Once you have selected the led option, you will be taken to the led screen where you can select either the led on/off option or the led color option. The menu will scroll twi...
24 on/off – led button on/off option. This toggles the led button on or off. When you press the button to heat up your atomizer, if the led is turned on, then the button will light up the color of your choice. When this function is turned off, the led button will not turn on. When you see the settin...
25 boost menu - this menu section allows you to turn the boost mode on and off and lets you change the duration of the boost. Boost 1 - .25 seconds boost 2 – .50 seconds boost 3 – .75 seconds boost 4 – 1.00 seconds boost 5 – 1.25 seconds once you have selected the boost option, you will be taken to ...
26 money saved counter we have added a feature that calculates money saved, cigarettes avoided and vape counter. In the set menu you will see this new icon. Selecting this will take you into the settings and information for the money saved area. Money saved - the first icon is a money saved status. ...
27 warning messages and fixes warning message suggested fix output too high or bad atomizer [1] >>> reduce volts / watts or replace atomizer output current high [2] >>> replace atomizer and try again output too high [3] >>> reduce volts / watts temperature high [4] >>> let cool and replace battery t...
28 one. Never try to recharge or reuse a bad battery. Also remember to always use the correct batteries in the procyon. Return for repair – if you get this error, try installing a new battery and replace the atomizer to see if the problem goes away. If you continue to get this error, contact custome...
