Proview PA-32JK1A User Manual - page 35
ENGLISH
Chapter Using the Features
With the LCD TV connected to a television programming source, press the
SOURCE
button on the remote to display the Source List. Use the
▲▼ buttons to select HDTV, and
press the OK button.
Press the MENU button on the remote control to display the Main menu, and use
the ◄► buttons to select the SETUP.
Automatically scans and stores all the TV channels
Setting up the HDTV Function
Press the OK button or LIST button to display the received channel list, then press
▲▼
buttons to select a channel. Or, use the▪ button with 0- buttons to select digital channel
(for example 9.1).
Press the
▼ button to select Channel Searching, and press the
OK
button.
The Channel Searching automatically creates a list of receivable channels from VHF/UHF
antenna or Cable TV if the source is connected. Select the Cancel button at any time to
interrupt the memorization process. (the list will not be created if interrupted)
Channel List
- KQED-HD
- KOED-SD
The digital main channel might include many subchannels (for example
-, -..) that are showing program at the same time.
Channel Searching
Tuner Mode Cabel-STD
Closed Caption OFF
V-Chip
Parental
Language English
Osd Transparent On
Gamma Dark
Default
Setup Select Exit
The Channel Searching will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Searching for each
RF input to create a list of available channels from both inputs.
Auto Program
Channel Searching
Found
0
Analog
Please wait a few minutes for completion.
Press Enter or Setup key to cancel.
Cable- STD
0
Digital
Cancel