ProVista Technology Ecoboxx120 User Manual - page 6
5
2.3 LED indicator
2.3.1 Charging indicator(Green, left one)
Normal Charging: LED ON (Solid green);
Overvoltage protection: the LED in slow blinking
Over current protection (Max. 2.0 A, last about 3 seconds), the LED in quick blinking
2.3.2 Battery level indicator(Green & Red – dual colors , middle one)
RED: Battery very low, please recharge the unit
Flash Orange: Battery low
Red/Green: Battery half full
Green: Battery half full to Full
Green Charging
2.3.3 Alert LED (Red, right one)
RED: Protection ON, unplug the device and reset the unit if Alert LED is “ON” !
Fault indicator(Red, bottom one)
Any group of the loads is overloading, the Red LED will blink; Other group of loads will work
properly if no fault. It will restore within 30 seconds after adjusting the loads to the extent
provided.
If the load is short-circuit, the Red LED will blink, it will restore within 30 seconds.
Remark: If Red LED blink, please disconnect the loads; It can damage the units if loads
continuous failures.