ProVisual CDV-2085IR-WDR User Manual - page 4
4.Parts instruction
CDV-2085IR-WDR
5
Focus
Zoom
3
4
5
6
7
8
9
10
11
1
2
1. Dome Enclosure: to protect
camera lens and body.
2. Glass cover screw hole
3. Base
4. Wire out hole
5. Stages of a screw the lid
6. OSD
7. IR LED
8. LENS
9. LED ALARM
10. Subpanel
11. Install screws hole
Camera installation
1. Loose the 3 glass cover screws by screwdriver ,
take the glass cover out.
2. Loose the Installed setscrews , to separate the
subpanel from camera body.
3. Drill 3 holes in the position needed
in accordance with the installation hole on
the subpanel ,push the Expansion Bolt inside
then tighten the screws, make the installation
hole aim at the three screws and fix it.
4. Choose the way the wire out, if out from the ceiling,
then need a hole on it, if from the side of the camera,
then just need to loose the Stages of a screw the lid ,
get the wire out from it.
6