Provo Craft cuttlebug User Manual - Thank You!
Setting up
1. To activate the Cuttlebug machine’s suction system, place the machine on a dry,
flat, and smooth surface where it can have 15 inches of space in front and back.
2. Lower both platforms at the same time by pressing them down until they are
perpendicular to the Cuttlebug machine. Lowering the platforms activates the
suction mechanism that will hold the Cuttlebug
machine in place.
Inside your box
You will find the following inside your box:
• Cuttlebug Die Cutter and Embosser
• Spacer block A
• Two cutting pads B
Thank You!
Attaching the handle
Congratulations, and thank you for purchasing the
Cuttlebug
™
Die Cutter and Embosser
™
. Cuttlebug
was designed with your creative needs in mind.
It’s easy, portable, and compatible with other die-cutting systems.
Cuttlebug will launch you into a new dimension of paper crafting possibilities.
Please read all the information in this pamphlet before using your new Cuttlebug system.
• Position handle on machine post
and insert screw into handle.
• Thin die adapter C
• User manual
• Handle
• Hex key tool
• Screw
• Plastic cap
• Turn screw with hex key tool
until tight.
• Place plastic cap.
Fig 1
Fig 2
Fig 3