PS Audio BHK Signature Preamplifier Instructions For Use Manual - page 7
4826 Sterling Drive, Boulder, CO 80301
Getting Started
PH: 720.406.8946 service@psaudio.com www.psaudio.com
15-071-01-1
Rev A
Getting Started
©2016 PS Audio Inc. All rights reserved.
®
Owner’s Reference
BHK Signature Preamplifier
To register your new unit, look on the back panel of the BHK Preamplifier and note the serial number.
Using any web browser, go to www.psaudio.com and click on
Register Products.
Once you have completed the registration process you can then go to the PS website and look at
the My Registered Products page. The link to this page is located at the top right hand corner of the
website once you are logged in. If you do not have web access you may register the unit via mail or
phone. Notification of upgrades to this product will be available only to registered owners via the web
and email. Full warranty information is included in this manual at the end.
CONNECTING TO SOURCES
Each of the 5 inputs on the BHK Preamplifier has both an RCA and an XLR input available. Only one
of these connectors may be used at a time on any one input. If your source component has both RCA
and XLR outputs available to connect to the preamplifier, it is always preferable to connect via the
balanced, XLR if possible. Once connected, either through the RCA or the XLR connector, the BHK
Preamplifier will now be connected without any further action on the user’s part (some preamplifiers
require the user to select between RCA/XLR via a switch).
Each of the 5 inputs on the preamplifier are identical and you may select any to connect to any source
other than directly to a turntable.
The BHK Preamplifier does not have a built in RIAA phono preamplifier. If you wish to use a turntable,
you will need to purchase a separate phono preamplifier first, such as our NuWave Phono Preamplifier
or the upcoming BHK Phono Preamplifier. Once purchased, use any of the 5 inputs on the BHK
Preamplifier to connect the phono stage output.
You can assign each of the inputs a unique name. You may also choose any one of the 5 inputs as a
home theater bypass. These options are available via the front panel command screen. Please refer to
the front panel setup menu later in this manual, for details.
Connecting to
Analog Sources
Warranty
Registration
Use an
External Phono
Preamplifier
Assign Input
Names
2