PS Audio Stellar Gain Cell DAC Instructions For Use Manual - page 10
©2017 PS Audio Inc. All rights reserved.
®
Owner’s Reference
Stellar Gain Cell DAC
Owner’s Reference
4826 Sterling Drive, Boulder, CO 80301
Owner’s Reference
PH: 720.406.8946 support@psaudio.com www.psaudio.com
15-083-01-1
Rev A
Home Theater
Setup
Max HP Volume
Max Volume
7
The next menu setting is the Max Volume setting screen. Rotating the volume knob adjusts the
maximum volume level from the Stellar Gain Cell DAC. Since the maximum output at 100 is +12dB
you may need to put a limit on the output to protect your equipment from accidental overload
depending on your specific system. This only affects the analog and balanced outputs.
Similar to Max Volume, Max HP Volume adjusts the maximum output from the headphone jack.
Rotating the volume knob adjusts the maximum volume level from the Stellar Gain Cell DAC’s
Headphone output. This feature is intended as a saftey precaution against hearing damage from
listening to playback at high levels.
The next menu screen is Home Theater Setup (HT Setup). Channels are selected by rotating the
volume knob. This feature allows you to select from one of the three analog inputs as a home theater
pass-through input. The purpose of this function is to enable surround sound users a fixed volume
level when the input volume level is controlled outside the Stellar Gain Cell DAC. In some cases,
home theater owners may share the front left and right loudspeakers with their home theater setup,
enabling them to use the Stellar Gain Cell DAC as their 2-channel control center when playing music,
then using the same left and right front channels when watching a film.
Display Time
The next menu setting is the Display Time setting screen. This is the amount of time the Display is
on. Rotating the volume knob selects times from 10 seconds to 1 hour. Auto will turn off the display
if no signal is detected.