PSB ALPHA PS1 Owner's Manual - page 6
LISTENING…
I.
To turn the speakers on, locate the rear toggle switch and switch it to the “ON” position.
II.
To verify power, check that the LED indicator is illuminated green.
III.
Turn on your audio source, adjust it to a desired listening level and enjoy all of your favourite
audio selections.
IV.
To adjust the volume level of the speakers, locate the rear volume control and set it to a desired
listening level. Be careful of excessive volume levels as it could result in severe and/or
permanent damage.
POSITIONING…
I.
As symmetrically as possible, place your Alpha PS1 Powered Speakers at a comfortable listening
location with no obstructions at the front or back.
II.
We recommend at least three inches of clearance around the back of both speakers. Good air
circulation is required for heat dissipation, and to ensure proper performance of the rear-firing
ports. Similar positioning and clearance should be used for both speakers.
III.
For nearfield listening and other listening scenarios, your preference may be to use the available
Alpha Tilt Base (PTB-1) to help tilt each speaker onto the listening axis. See Available
Accessories.
For more detailed information about speaker placement, please visit
www.psbspeakers.com
PROTECTING YOUR INVESTEMENT
For long lasting enjoyment of your PSB speakers, you should respect their limits and avoid excessive
volume levels for music or movie playback. Excessive volume levels can damage all types of speakers.
If your speakers are pushed to excessive volume levels, they could be driven into “clipping”, which may
result in severe and/or permanent damage. If listening to your speakers at loud levels, listen carefully for
any signs of harsh, distorted midrange and diminishing precision – if detected, turn the volume down
immediately.
NEVER TEST PEAK LISTENING LEVELS OF YOUR SPEAKERS BY TURNING THE VOLUME UP ALL
THE WAY!
ENGLISH
6