Summary of Q-BT3
Page 1
En www.Qacoustics.Co.Uk.
Page 3: Contents
Contents 04 safety information 05 package contents 06 features 06 feature summary 06 product description 07 instructions 07 q-bt3 features 11 remote control 12 rubber bumpers 13 operating q-bt3 17 specification 18 warranty ec declaration of conformity q-bt3 conforms with the following eec directives...
Page 4: Safety Information
Safety information important information - please read carefully read and keep these instructions. Heed all warnings and follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s inst...
Page 5: Introduction
5 package contents thank you for purchasing q acoustics q-bt3. This manual is intended to take you through the setup and installation of q-bt3 and will help provide a trouble free setup and optimum performance from the product. Please read the instructions, important safety information and warnings ...
Page 6: Feature Summary
Features • 2 x 50w stereo amplifier in right hand speaker • passive left hand speaker • 1 x 100mm woofer and 1 x 30mm dome tweeter per speaker • aptx® bluetooth® input – up to 8 paired devices • digital optical audio input • rca stereo line level audio input • 3.5mm stereo headphone level audio inpu...
Page 7: Q-Bt3 Features
No light = off power cord is connected but ac switch is turned off. Solid red= off (standby) power cord is connected and ac switch is turned on, but q-bt3 is off. Solid green = on analogue input (line in 1 or line in 2) is the active source. Solid white = on optical input is the active source. Quick...
Page 8
Bluetooth device: q-bt3-101 rear panel 1 2 5 9 8 4 6 7 3 instructions 8 1. Digital optical input 2. Analogue line in 1 3. Analogue line in 2 4. Subwoofer out 5. Bluetooth pair button 6. Power switch 7. Ac input 8. Output speaker terminals 9. Bluetooth name label.
Page 9
Instructions 9 digital 1. Digital optical input toslink® connector for connection to the digital optical output on a tv or other source. If there is a choice between digital or analogue connection to the q-bt3 choose digital for superior audio quality. The digital input is selected automatically if ...
Page 10
Instructions 10 line in 2 the 3.5mm input jack is ideal for connecting to the headphone output of an external audio source using the 2m cable provided: the analogue inputs are automatically selected when bluetooth device is connected and playing and no optical digital input signal is present. The st...
Page 11: Remote Control
1. Power press this button to turn the q-bt3 standby on/off. (power switch on the rear panel must be switched to on) 2. Source select press this button to manually select the audio input source. Status led will change colour accordingly. 3. Volume up / down press vol + to increase the volume. Press ...
Page 12: Rubber Bumpers
1. Clean the surfaces of the speakers where the feet will be applied,ensuring they are free from dirt and grease. 2. Remove the rubber bumpers from their backing paper. Take care to grip the sides rather than the adhesive surface 3. Position the bumpers on the underside of the speakers and push firm...
Page 13: Operating Q-Bt3
Instructions 13 power and standby power on q-bt3 at the ac switch once all rear panel audio connections are made. The speakers will enter standby, with a red status led. Exit standby by pressing the standby button on either the top panel or the ir remote. The led will initially turn green but may th...
Page 14
Pairing a bluetooth device q-bt3 is designed to automatically go into pairing mode if there is no bluetooth device connected. To pair your bluetooth source: 1. Turn q-bt3 and the bluetooth device on. 2. Make sure bluetooth is enabled on the device to be paired. The bluetooth controls are typically f...
Page 15
Cable/satellite remote control the q-bt3 has been designed for easy integration into your home entertainment system as it has the ability to be controlled by many types of programmable remote control. This may include the remote control for your satellite and cable system if it has punch through cap...
Page 16
Tv 1 2 3 6 5 4 7 8 9 0 vol clear mute instructions 16 type 2 volume up / down mute / standby • press the “tv” button (top right of remote). • point remote away from receiver, press and hold “clear + vol ”. • the remote’s led will flash green twice. • enter “1247”. The remote’s led will flash green t...
Page 17: Specification
Specification 17 audio performance power output: 2 x 50w for 100w total amplification thd (at rated power): frequency response: ±0.5db 20hz to 20khz s/n ratio (a-wtd): -85db line in 1 input sensitivity: 2.0vrms line in 1 input overload: 2.2vrms line in 2 input sensitivity: 1.0vrms line in 2 input ov...
Page 18: Q Acoustics Warranty
Warranty 18 q acoustics products are warranted free of defects in materials and workmanship for a period of 2 years from the date of purchase. During the warranty period q acoustics will, at its option, repair or replace any product found to be faulty after inspection by the company or its appointed...
Page 20
Www.Qacoustics.Co.Uk q13924-is_r0