Q25dvr4es economy series user manual contact us: q-see products 8015 e. Crystal dr anaheim, ca 92807 website: http://www.Q-see.Com customer service: phone: 877-998-3440 x 538 email: cs@dpsi-usa.Com tech support: phone: 877-998-3440 x 539 email: ts@dpsi-usa.Com fax: 714-998-3509 q-see q25dvr4es user'...
Q-see q25dvr4es user's manual page 25 table of contents page 2 q-see q25dvr4es user's manual q-see product warranty thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exc...
Chapter 10: appendix - 10.1 system connection diagram page 24 q-see q25dvr4es user's manual chapter 1: dvr features 4 channel bnc camera input. 1 channel bnc video output. Video source option: ntsc / pal. Motion detection with sensitivity and area settings. Time schedule recording / motion triggered...
Q-see q25dvr4es user's manual page 23 q-see q25dvr4es user's manual chapter 2: layout - 2.2 rear panel chapter 2: layout-2.3 remote control 1. 1 x bnc video output 2. Fan 3. 4 x bnc video input 4. 12v dc power supply 5. Usb 2.0 port 1 1 2 2 3 3 4 4 5 5 page 4 13. Menu enter or exit setup menu 15. Se...
Q-see q25dvr4es user's manual q-see q25dvr4es user's manual caution: do not remove the cartridge while the dvr is on! Caution: the wedge at the end of the cartridge handle must be fully inserted into the compartment; otherwise the cartridge will not be able to insert into the dvr firmly, it could al...
Q-see q25dvr4es user's manual q-see q25dvr4es user's manual chapter 3: installation - 3.2 connecting cameras and tv monitor chapter 3: installation - 3.3 connecting power supply chapter 4: system boot -4.1 detecting installed hard drive after connecting the power, the system will boot-up and detect ...
Q-see q25dvr4es user's manual q-see q25dvr4es user's manual chapter 4: system boot - 4.2 recovering lost data the system will automatically recover lost data. A power error can cause data to be lost. Chapter 4: system boot - 4.3 restore recording feature if a power error occurs during recording proc...
Q-see q25dvr4es user's manual q-see q25dvr4es user's manual chapter 5: dvr setup - 5.1 setup menu press [ menu] to enter the setup menu; use [ up] and [ down] to select item; press [ select] to modify settings and [ menu] to exit. Chapter 8: usb dvr access - 8.2 program buttons page 8 page 19 menu d...
Chapter 5: dvr setup - 5.3 record select configure which channels are allowed to record. Note: if no channels are selected, an error message will appear briefly on the screen when record is selected. Q-see q25dvr4es user's manual q-see q25dvr4es user's manual chapter 5: dvr setup - 5.2 camera select...
Q-see q25dvr4es user's manual q-see q25dvr4es user's manual chapter 6: recording -6.3 recording time on hard drive estimated record time based on a 120gb hard drive (quad mode) unit: hour quality frame rate 30 15 7 1 high normal low 20 15 12 58 78 97 117 155 194 251 332 416 1748 2330 2913 system sys...
Q-see q25dvr4es user's manual q-see q25dvr4es user's manual chapter 6: recording - 6.1 start recording press [ record ] to start recording (as set in 5.7 schedule set). System will display information on screen. Note: only each mode can enlarge single channel to full screen display. 1. Hard drive us...
Chapter 5: dvr setup - 5.10 sub menu-password change system default password: press [ ch1] button six times. User needs to enter six characters for the password. All keys can be used as password key except the [ menu] key, which is used to exit. Note: to reset the dvr. Press the [pause] button 10 ti...
Chapter 5: dvr setup - 5.12 sub menu-time set to configure the dvr's time: press [ up] and [ down] to move prompt. Press [ select] to modify. Press [ menu] to save and exit. Q-see q25dvr4es user's manual chapter 5: dvr setup - 5.13 hard disk setup overwrite enabled: if you choose yes, recording cont...
