4mp wi-fi pan tilt camera quick start guide english.
Welcome! Congratulations on your latest purchase and welcome to the q-see family. This guide will help get your camera up and running. What’s included • (1) qcw4mp1pt wi-fi camera • (1) power adapter • (1) mounting hardware • (1) quick start guide step 1 before installing, please register your devic...
Step 2 plug the camera into a power source and wait until the indicator light begins to flash. After 15-30 seconds the light should slowly flash green which indicates it is ready to configure. If the light displays solid red, hold the reset button for 15 seconds to reset the camera. Important: go th...
Step 5 enter an email address to use for your account. You should immediately receive an email with a verification code. You will have two minutes to enter the verification code, so be sure you will have quick access to the email address used. Tap send verification code to mail . Step 7 create a pas...
Step 8 enter your email address again and the new password. Tap login to continue. Step 9 tap the + symbol to continue. In the following screen, select “wi-fi camera” for device type. Next, using your mobile device’s camera, scan the qr code on the back of the wi-fi camera. 5.
Step 11 in the next screen, tap “yes, config wi-fi”. Enter your wi-fi network’s password and before tapping “next”, place your mobile device within 12” of the wi-fi camera. Click “next” to proceed. Connecting may take over a minute. Once connected, the led on the front of the wi-fi camera will turn ...
Wi-fi connectivity troubleshooting if you are having issues connecting your qcw wi-fi camera to the desired wi-fi network, this tutorial will show you how to establish the connection with the help of a standard ethernet (cat5) cable. Step 1 select ethernet wi-fi setup . Step 2 connect the wi-fi came...
Step 3 if your camera is already connected to a wi-fi network it will appear at the top. Select the wi-fi network you wish to connect your camera to. Step 4 enter the password for your wi-fi network. Step 5 select start preview once the camera is connected. You may now disconnect the ethernet cable ...
Camera features the 4mp wi-fi pan tilt camera features the ability to rotate your camera view left to right (pan) and to adjust your camera view up and down (tilt). The camera’s microphone and speaker will enable you to both hear and speak through your camera for two-way audio purposes. The qr code ...
10
Regulatory information fcc information this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesi...
Rev . 11/20/17, qcw4mp1pt gqcw4mpt -e-v2.
