Q-See QPSCDCA User Manual
MONITOR
Digital Color CCD Camera
CCTV SYSTEM
A.FEATURES：
This camera uses CCD as image capture device,so it is
very small and light, anti-shock. It is your best choice for
CCTV system：
（1）High Resolution.
The horizontal resolution is 480(420)TVL.
（2）Auto Electronic shutter（AES）.
AES can modify the CCD exposure time automatically. A
stable brightness and excellent exposured image will be
captured no matter the outer light source is strong or
weak. ON and OFF are switchable.
（3）Back Light compensation（BLC）.
A new developpde digital illumination intensity control
function makes use of DPS technology to solve the shadow
problem by modifying iris and gain.
（4）Auto Gain Control（AGC）.
（5）Auto Iris Lens VIDEO and DC drive.
（1）Don`t aim the camera at strong light or put in a place where is rainny
or dusty;
（2）Don`t touch CCD with finger,if necessary,Please clean the dust with
soft cloth dipped with alcohol;
B.PRECAUTIONS：
C.Parts Included：
D.System Connection：
（3）Screw the anti-dust cap on the CCD if the camera are not used for
long time;
（4）Power supply refer to the specificatlon;
（5）Please handle with care to avoid strong shock.
（1）One Camera（2）One Operation Manual（3）One Anti-dust Cap
（4）One C Ring （5）One IRIS Conventor（E4-191J-100）
（1）One monitor system with one camera：
Video monitor
BNC
DC 12V adaptor
BNC
（3）Auto Iris Lens:
（a）IRIS pin definition
（b）Modify level knob to get the best image quality
Video monitor
（2）One monitor system with two or more cameras：
MULTIPLEXER
VCR
E.OPERATION PROCEDURES：
F.SPECIFICATIONS：
Specification:
2
1
4
3
1.DAMP-/POWER
2.DAMP+/NC
3.DRIVE+/VIDEO
4.GND AES
IRIS pin definitions
（1）Mak sure the power supply is right.
（2）Screw on a suitable lens on the camera.
（3）Connect the VIDEO output into monitor,Make sure the
power supply is on, and the the image capturde by
camera should appear in the monitor.
（4）Modify the Iris and focus to get the best image quality.
（5）Background Focus Modification：
The background focus is usually up before the camera is
selled.But under some special status. Background focus
need to be modified. When modify it ,put lens focus at
∞,capture an image of object 20m far away ,screw off
the fix screw to modify the focal position to get a
clear image on the monitor, and then fix the fix screw.
（6）Electronic shutter：
Under EE model, the shutter speed will modified
according
to the surrounding illumination.
Design and specification are
subject to Change without
prior notice.
Printed in2005.12.01
PAL/NTSC:752(H)×582(V)
420TVL
1/3"SHARP CCD
Internal
Interlace2:1
1.0Vp-p 750Ω BNC
On/Off
0.45
PAL /NTSC:1/50S~1/100000S
0.5Lux/0Lux
≥50dB
Scanning system
Sync System
Eleotronic Shutter time
White Balance
Image Sensor
Picture Elements
Horizontal Resolution
S/N Ratio
Gamma
Video Output
Usable Illumination
On/Off
On/Off
Video/DC
C/CS
3.5mm~8mm
DC12V
120mA
350g
-20℃～+60℃
Power Supply
Lens
Power Consumption
Operating
T
BLC
AGC
Auto Iris
Mount Lens
Weight
QPSCDC(A)
Model
WWW.q-see.com