Q-See QSDF8204C4 Quick start manual

Quick Start Guide

1

Set Up

2

Connect

3

Enjoy

Quick Start Guide – Remote Internet Monitoring

4 Channel DVR with 7” In-Dash LCD and 4 Color CCD Cameras

Model: QSDF8204C4

Remote Internet Monitoring

AV

VOL+

OPEN

AUTOMOBILE TV SYSTEM

VOL-

CH+

VIDEO CD

SET

1/

2/abc

6/mno

7/qrs

8/tuv

9/wxyz INFO/10+/

PTZ/    /

3/def

4/ghi

5/jkl

HOUR

MIN

CH-

TV

CLOCK

[

MENU/+

Focus

Zoom

Iris

Speed

A

ESC

STOP

FF

REW

PLAY

SEARCH

Rec

Power

HDD

Backup

Net

Play

REC

DVR with 7” In-Dash LCD, Pre-Installed Hard Drive

1

Set Up

Accessing the DVR from a single router:  To access the DVR from a computer that is 

using the same router as the DVR, set up the network settings using either the DHCP 

option or assigning a static IP address:

To Setup DHCP (Most common routers are DHCP) 

Convert assigned DHCP IP address to 

a Static IP Address: (Do this so your IP 

address does not change.)  Push the INFO 

button on the remote or DVR front panel to 

get the IP address information assigned by 

the router.  Then go back to the IP config 

window change to static, and enter the IP 

addresses from the info screen.

A 

Remote Monitoring Set Up for DVR using DHCP to setup IP address

3. Under IP Config: 

select DHCP, select OK 

and reboot the system for 

settings to register.   

Push the 

INFO 

button on 

the remote 

control to 

see the 

newly 

assigned IP 

address.   

1. To assign an IP address to 

the DVR using DHCP, select 

the Menu Key on the DVR to 

access the Main Menu.

2. Use the DVR Direction Keys 

to select the Network Option 

(red box) and push Enter Key.  

Select the IP Configuration 

option (green box) and select 

Enter.

Page 1