Q3 Innovations AlcoHAWK PT500 Owner's Manual - Menu Options
7
MENU OPTIONS
When the screen displays “Test” and “Options”, press the SELECT
button to view the menu options. Use the SELECT button to move
down through the menu options. Use the ENTER button to enter the
selected menu option.
Alarm Point
The unit will read “High” if the BAC reading exceeds the alarm point set-
ting. The default setting is 0.020% BAC. You can change the alarm point
from between 0.020%-0.080% BAC.
To change the setting press the SELECT button until the unit shows
the desired value on the screen. Press the ENTER button to save the
setting.
Temperature Scale
You can switch between Celsius (C) and Fahrenheit (F) for the tempera-
ture sensor. The default setting is Fahrenheit (F).
To change the setting press the SELECT button until the unit shows
the desired scale. Press the ENTER button to save the setting.
Blowing Time
You can adjust the blowing time from three (3) to eight (8) seconds. The
default setting is five (5) seconds. Five (5) seconds is the standard time
to obtain a proper sample.
Caution: Only adjust this setting if the test subject is not able to
exhale for 5 seconds or if the subject can easily exhale more than
five (5) seconds.
To change the setting press the SELECT button until the unit shows
the desired number of seconds. Press the ENTER button to save the
setting.