Q3 Innovations AlcoHawk PT500P Owner's Manual - Convert Units
8
Convert Units
You can change the unit of alcohol concentration shown for tests. You
can choose between %BAC (U.S.A), g/L, or %ºBAC. The default setting
is %BAC (U.S.A) (the U.S.A standard).
To change the setting press the SELECT button until the unit shows
the desired conversion. Press the ENTER button to save the setting.
Test Counter
This menu feature shows the number of direct sample tests performed
on the unit. See Verification and Calibration (pg.10) for benefits of this
feature.
PRECAUTIONS
1. Wait at least 20 minutes after drinking, smoking and eating before
testing.
2. Do not test in strong winds or in a closed room where a heavy
amount of smoke or alcohol is present.
3. When the battery low symbol
appears, install new AA alkaline
batteries.
4. Do not blow smoke, food or liquid into the unit.
5. Only use the unit in a temperature range of 10 - 40°C or 50 - 104°F.
Operation above or below this range may affect the results.
6. BAC changes over time depending on many factors. BAC at one
time can differ from BAC a few minutes later.
7. Do not use this unit with an ignition interlock device or while inside a
vehicle.
8. You cannot use the results of this unit in court of law.