Qbex Aero Style User Manual - Connecting Wireless Lan

30

qbex aero style / User’s guide

Set Up Automatic Wireless LAN Recognization

Press  Fn  +  F2  or wireless LAN switch to turn on wireless LAN function. When wireless LAN is enabled, 

the Wireless LAN LED  lights.

The connection message will appear on task bar when the possible wireless 

LAN connection is detected.

Click the wireless network connection icon and the program of Wireless Network Connection 

will be launched.

Wireless Network 

Connection Icon

Select a wireless network from the list that appears, and then click [Connect] button. If the network you is 

security enabled, the program will ask you to type “Network key”.

* Click [Refresh network list], if there is no 

wireless networkin the list.

*If the network is one that support “Wireless 

ProvisioningServices”, you might be asked 

to download additional files that will allow 

your notebook to connect the network.

*  If  you  connect  to  a  unsecured  wireless 

netwrok, the warning message will appear. 

Directly click [Connect] to connect or click 

[Cancel] to quit the dialog box. After setting 

up  the  security,  connecting  the  wireless 

LAN again.

Type [Network key] and [Confirm network key], click [Connect] to connect wireless LAN.

*If the network key automatically provide by 

the network, the connection will be made 

automatically, and the program wi ll not 

request you typing networ k key.

*Sometimes, setting up network is 

necessary.

Connecting Wireless LAN

1

Tip

2

3

Tip

4

Tip