Qcam QSD-721 User Manual - 4. Package Contents
5
4. Package Contents
Please unpack your intelligent security camcorder and check that the following were included: Qcam QSD-
721 intelligent security camcorder
5V DC Adapter
USB 2.0 Cable
User Manual
Quick Start Guide
5. Qcam QSD-721 at a glance
NOTE: For video tutorials on your Spy Cam DVR and its widget please visit:
qcam.com/qsdsupport
6.Charging
The camcorder comes with an internal rechargeable battery. When using the camcorder for the first time,
or if you are using it after a long period of non-usage, remember to fully charge the battery for at least 6
hours and resync the time by using the Qcam widget (see section “PC Software Widget”). You can charge
your camcorder using the USB port of your computer, the included DC adapter, or using a car adapter that
you already may own.
To charge the battery through a USB port, connect the USB cable to the USB port of the computer and
connect the opposite end of the USB cable to the QSD-721. For details, please see the status below. The
QSD-721 will function as a mass storage device, you will not be able to record video at this while
connected to the computer.
To charge the battery through a DC adapter or car adapter, connect the DC adapter or car adapter to a
power outlet/supply and to the QSD-721 to begin charging. For details, please see the Status section
below. Moreover, you will also be able to record video while charging from a standard power outlet or car
power supply, depending on the mode you set.