1. DL manuals
  2. QEP
  3. Saw
  4. 60007
  5. Owner's Manual And Parts List

QEP 60007 Owner's Manual And Parts List

Summary of 60007

  • Page 1

    7" wet saw scie à eau de 7 pouces sierra para agua de 7" 7" wet saw scie à eau de 7 pouces sierra para agua de 7" m a n u e l d ’ u t i l i s a t i o n e t l i s t e d e p i È c e s o w n e r ’ s m a n u a l a n d p a r t s l i s t m a n u a l d e o p e r a c i Ó n y l i s t a d e p a r t e s prÉcau...

  • Page 2

    - 2 - table of contents safety instructions for wet saw ......3 safety guidelines............................3 electrical requirements ..................4 warning ........................................5 state-of-the-art features ................5 electrical / motor specifications ....5 unpacking, ...

  • Page 3

    - 3 - safety instructions for wet saw read this owners manual completely and make sure you understand all of its safety guidelines. 1. Keep guards in place and in working order. 2. Remove adjusting keys & wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from too...

  • Page 4

    - 4 - electrical requirements • connecting tool to power source outlet. This tool must be connected to a grounded power source while in use to protect the operator from electrical shock. • in the event of a malfunction or breakdown, grounding provides a path of least resistance for electrical curren...

  • Page 5

    - 5 - warning for your own safety read instruction manual before operating saw. • wear eye protection. • use splash hood for every operation for which it can be used. • disconnect saw before servicing, when changing cutting wheels, and cleaning. • use tool only with smooth-edge cutting wheels free o...

  • Page 6

    Cutting table marked in inches and centimeters for accurate cut dimensions. Steps for positioning 45° / 90° rip guide: 1. Set the rip guide by positioning it on the desired dimension and tighten the threaded knob on the rip guide. Make sure rip guide is firmly tightened to avoid slippage. 2. The rip...

  • Page 7

    - 7 - saw operation 1. Make sure you have read this manual completely before operating your saw. 2. Note: the saw motor has two on/off switches. Both switches must be “on” for your saw to operate. • one switch is located on the motor housing. Push this switch to the “down” and “locked” position. • t...

  • Page 8: Diagram of Wet Saw

    - 8 - diagram of wet saw description no. Water tray assembly 1 frame assembly 2 roller guide bar 3 cutting table 4 45°, 90° rip guide 5 45°, 90° rip guide adjustment knob 5-1 l-shaped plate 6 angle bar rollers set 7 metal bushing (set of 12 8 angle grinder 9 mounting plate 10 wing screw 10-1 blade g...