- 1 - table of contents general safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 electrical requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
- 2 - general safety instructions read this owner’s manual completely and make sure you understand all of it’s safety guidelines. 1. Keep guards in place and in working order. 2. Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches are removed from tool ...
- 4 - grounding instructions a. All grounded, cord-connected tools: in the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor...
- 5 - functional description and operation attach the saw to the stand. Make sure the stand is level. A. Starting and stopping 1. Connect the unit to a power supply of the correct voltage and frequency (120v~, 60hz). 2. To start the machine press the switch “on” position. 3. To stop the machine, pre...
- 6 - fig. 10 fig. 12 fig. 13 fig. 11 fig. 14 fig. 15 fig. 16 fig. 9 fig. 8-1 8. Attach handle to motor unit. (fig. 10) 9. Unlock the motor unit by loosening the knob (fig. 11). 10. Pull the motor unit to the full front position, to extend the water/electric protective nose. Attach the nose housing ...
- 7 - f. Cutting with the table at an angle 1. Loosen the two knob screws on the two rail stands (fig. 17). 2. Tilt the rail with the blade to the desired angle (fig. 18). 3. Tighten the two knob screws and make the cut. G. Changing the blade warning! Disconnect the power supply before making adjust...
- 8 - maintenance warning! Disconnect the power supply before making adjustments or maintenance on the machine! Never use water or chemicals while cleaning electrical parts of the machine. A. Periodic maintenance of the saw will reduce unnecessary problems. Use soft cloth to clean the water and dust...
Technical specifications main voltage (volt): 120 v main current (a): 15 a motor capacity: 2.4 hp mains frequency (hz): 60 hz insulation class: b no load speed (rpm): 3550 rpm max. Cutting dept. At 90°: 2" max. Cutting dept. At 45°: 4/5" rips tile size: 40" diagonal tile size: 28" diamond blade size...
- 10 - exploded parts 83200-08 83200-03b 83200-11 83200-27 83200-16.
S104 made in china q.E.P., co., inc. Boca raton, fl 33487 www.Qep.Com.
