Rs485 surveillance keyboard.
Directory 1. Summary ......................................................................................................................... 1 1.1 notice ..................................................................................................................... 1 1.2 function and charact...
4.1.3 joystick calibration .................................................................................... 16 4.1.4 multi-keyboard connection state setting ................................................... 17 4.1.5 keyboard screen brightness ......................................................
1 1. Summary the keyboard is an universal keyboard of security monitoring series, which can control integrate dome camera with all kinds of protocols matrix and dvr, which has been equipped with 3d joystick and 2d joystick which can control the revolving of the camera and the zoom magnification of l...
2 relative humidity : less than 90% physical property l * w*h =218* 180 * 55 ( mm ) weight : 630g ( net weight ).
3 2. Keyboard connection 2.1 keyboard interface instruction there is inter face on the back of the key boa rd, which equipped with kinds of communication interfaces: rs422 、 rs485 、 rj 45,which can connect and control kinds of peripheral equipment. 2.1.1 rs42 2 and rs485 interface rs422 and rs485 in...
4 6bit ribbon cable rj45 power supply port picture2-1.2 2.2 matrix connection the keyboard can control matrix of pelco cm6700 、 cm6800.For example ( following) that the keyboard connects with the pelco cm 6700 matrix in order to introduce the connection between the keyboard and the matrix. There are...
5 picture2-2.1 2.2.2 rs422 remote connection rs422 connection line, one end connects with rs4 22 interface ( rem ote k ey bo ard( s) ) of cm6700 back plate, the other end connects with rs4 22 interface of the keyboard, the keyboard interface rs 422 ( r + r- ) corresponds with matrix interface rs 422...
6 manufacturers. About connection with the dome, please see to the dome installation manual. 2.4 the connection of the keyboard in the system the keyboard controls the matrix and then controls the domes indirectly by the matrix (sees to the picture2.4-1) when unconnected with the matrix, the keyboar...
7 1.A line of rs485 may control up to 32 main controlling and under controlling equipments, so a keyboard which controls the dome directly may connect up to 31 domes. 2. The system may connect up to 4 keyboards at the same time, and the four keyboards id are different picture 2.4-2 3. Keyboard opera...
8 picture 3-1.1 this paragraph describes mainly the operation ways of keyboard. It needs to especially explain that different systematic platform has not the same operations, and different systematic platform may have some particular requirements and operations, plea- se operate it to combine with t...
9 controlling camera, monitor id, baud rate and soon. In the last line there are keyboard input commands and joystick operation. As the right picture shows : when operate it, lcd will turn on back light, in order to operate easily; stop to operate it for 15 s, back light will be off automatically. C...
10 press 【 tele 】 ,lens zoom tale (the multiple of lens increase), leave to stop. Press 【 wide 】 , lens zoom wide(the multiple of lens reduction), leave to stop. Z focus control : press 【 far 】 manually far focus , to make the far object more legible, leave to stop. Press 【 near 】 manually near focu...
11 run tour : 【 n 】 + 【 tour 】 / 【 tour 】 . Press tour number , press 【 tour 】 , run tour. If system has only a tour, press 【 tour 】 directly . Set tour must enter setup menu. 3.7 cal l the dome main menu 【 9 】 + 【 0 】 + 【 preset 】 : input 90, then press 【 preset 】 to call the main menu of object do...
12 3.8.4 change object monitor 【 n 】 + 【 m on 】 input the monitor id, then press 【 mon 】 , the image and the menu of the dome that you control-led by keyboard will display in the object monitor..
13 4. The keyboard menu controlling * the keyboard me nu con trolling press 【 set 】 ,keep 2 seconds ; got the main menu, the lcd display is following. (see the picture 4.1-1) all menu setup should call main menu. Press numerical key or move the joystick up and down to the option which you need and t...
14 2. Move the joystick to 【 1 】 then choose keyboard setting lcd display (see to the picture 4.1.1- 2) 1.Set kb parameter 1.Screen light 2.About keyboard picture 4.1.1-2 3. Move the joystick to 【 1 】 to choose keyboard specification lcd display (sees to the picture 4.1.1-3) picture4.1.1-3 4. Move t...
15 the screen will show 【 error 】 if input the numerical key which are excess the id scope (1-6 4) (sees to picture 4.1.1 -6) picture4.1.1-6 5. Press 【 prev 】 or move the joy stick left wards then go back gradually the factory default id of the keyboard is 1; the id number must be 1 if the single ke...
16 success it means the operation is success. Then press 【 prev 】 or move the joys tick left war do to go back. Must be used 9600 bps when connecting with the matrix; and must b e used 9600 b ps or 1 9 200 bps when connecting the keyboard online. 4.1.3 joystick calibration user enters into the joyst...
17 4.1.4 multi-keyboard connection state setting enter into osd menu, lcd will display as picture 4.1 .1- 1 shows. Press 【 1 】 to set the keyboard. Lcd will display as picture 4. 1.1-2 shows. Press 【 4 】 to set multi-keyboard connection state setting. After you select 【 multi keyboard state 】 , tilt...
18 version:1.00 kb id:001 protocol: factory balldrate:960 0bps picture4.1.6-1 move the joys tick leftwards to return . The keyboard mess age menu will display the keyboard parameter setting, the keyboard model, id address, the keyboard protocol and the keyboard baud rate. 4. 2 dome setting this para...
19 picture 4.2.1-2 the first item is setting dome preset; the second item is calling dome preset; the third item is clearing dome preset. Move the joystick to 【 1 】 to enter preset setting, this item requires inputting the preset number that you will save, as lcd shows (picture 4.2.1- 3) preset num:...
20 input corresponding preset number, press 【 enter 】 to call preset, lcd will show ( success )tilt the joys tick left or press 【 prev 】 to back to the former menu. Move the joystick to 【 3 】 to enter the clearing preset menu, as lcd shows (picture 4.2.1- 6) picture 4.2.1-6 input the preset number t...
21 then press 【 enter 】 to save, lcd will show ( success ) and back to the former menu. Choosing the second item (set right limit), same operation as left limit back to scan menu, then press 【 3 】 to run scan. After entering the set ting dome pattern menu, the joys tick will control the dome directl...
22 after entering the set ting dome pat tern menu, the joystick will control the dome directly, at this time the keys in lens controlling area also can control the dome lens, the operation of the joystick and the key is invalid for the dome under general menu mode. 4.2.4 tour setting move the joysti...
23 press 【 3 】 to run tour. Is valid to insert the presets in tour undervido-b02 protocol but it is invalid under other protocols 4. 3 protocol setting enter the menu, as lcd shows (picture 4.1.1- 1) press 【 3 】 to enter protocol setting, as lcd shows (picture 4.3-1) 1.Matrix 2.Dome 3.Dvr picture 4....
24 1.Factory protocol 2.Pelco-p protocol 3.Pelco-d protocol 4.Vido-b02 picture 4.3.2-1 4.3.3 dvr controlling mode move the joystick 【 3 】 to enter dvr directly con trolling mode, as lcd shows (picture 4.3. 2-1) choose corresponding protocol according to user's actual in stance , the system will back...
25 maximum theoretical transmitting distances are as follows according to different baud rate: if user selects thinner cables, or installs the dome in an environment with strong electromagnetic interference, or connects lots of equipment to the rs 485 bus, the maximum transmitting distance will be d...
26 picture 4-1.2 * problems in practical use user adopts a star configuration in practical connection. The termination resistors must be connected to the two equipments which are farthest away from each other, such as equipment 1# and 15# (refer to picture 4-1.3). This connection way not accord with...
27 picture4-1.3 picture 4-1.4.
28 5.2 keyboard shortcut operation manual working mode shortcut operation object function direct control mode and pelco matrix mode 【 n 】 + 【 cam 】 high speed dome input dome id, pre 【 cam 】 to select object dome. 【 tele 】 high speed dome press 【 tele 】 , increase the multiple of lens 【 wide 】 high ...
29 【 0 】 + 【 patter 】 【 pattern 】 to save pattern 【 n 】 + 【 patter 】 high speed dome input pattern number(1-4), press 【 pat tern 】 to run pattern 。 【 n 】 + 【 tour 】 / 【 tour 】 high speed dome input tour number, press 【 tour 】 or directly press 【 tour 】 to run cruise. 【 9 】 + 【 5 】 + 【 preset 】 high ...
30 6. Keyboard menu index 7. Maintenance service terms 1. Range of warranty ● the product will be maintained free for one year..
31 ● the product will be obtained the free maintenance service if the same malfunction appears again within three months. ● malfunction of products caused by force majeure (such as war, earthquake, lightning strike and soon ), abuse, non-standard operation, change of construction, non- normal wear o...
32.