Qioptiq LED RL 4 User manual - Warning
This high quality product has been designed and developed to require a minimum of mainte-
nance. Please follow the guidelines below and read this manual in its entirety to ensure safe op-
eration of the unit.
Warning
•
Please disconnect plug from the main socket before cleaning the device.
•
Storing and using the device only in dry rooms.
Safety Information
•
To avoid eye damage, don‘t look directly into the light source when turned on.
Symbols
The following symbols are used in this manual.
CAUTION! This symbol indicates a potential risk and alerts you to proceed with caution.
Important: The evaluation of eye safety occurs according to the standard CIE S009/E:2002 („photobiological safety of lamps and lamp systems“). Within
the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the „low risk“group (relaing to devices in the visible spectrum
with an exposure time of 100s). Under real circumstances (for exposure time, eye pupils, observation distance), it can be assumed that no endangerment
to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure
potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and
afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.
Intended Use
The LED ring lights offer a standard diameter of 66mm. They have been mainly developed for
lighting applications in the area of stereo microscopy. They provide a shadow free, constant and
flicker free light and are basically suitable for all types of microscopes and cameras. With a ring
adapter the diameter can be reduced in steps from 66mm down to 50 mm. The electronic light
control allows a continuous and constant dimming from 0%-100%.
The ring light consists of 48 long life, pure-white or natural-white LEDs
. Alternatively version in red,
green, blue, IR and UV are offered. As an accessory a frosted glass diffuser creates a diffuse
light. The LED ring lights with diffuser minimize mirror effects and can be used in quality control
and inspection.
LED Ringlichts RL-Series
Art.-No.
LED Ring Light RL4
G40 5750 000
LED Ring Light RL4-NW
G40 5751 000
LED Ring Light RL4-R
G40 5752 000
LED Ring Light RL4-G
G40 5753 000
LED Ring Light RL4-B
G40 5754 000
LED Ring Light RL4-UV400
G40 5755 000
LED Ring Light RL4-UV375
G40 5756 000
LED Ring Light RL4-UV365
G40 5757 000
LED Ring Light RL4-IR
G40 5758 000
GB
Package Contents
Description
Quantity
LED Ring Light RL4
1
Power Supply Plug, 24V with industry plug
1
Table Control
1
1