Qisda M26 User Manual - 1  Introduction

Summary of M26

  • Page 1

    Copyright ©2008 qisda corporation. Confidential property m26 evaluation board user guide m26 gsm / gprs wireless module evaluation board user guide rev. 1.0.0 2008/05/26 document id: m4-11-0002-100 copyright © 2008 qisda corporation. All rights reserved. This document contains proprietary technical ...

  • Page 2: History

    M4-11-0002-100 - 2 - version: 1.0 – 2007/12/03 m26 evaluation board user guide date originator reviewer 26-may-2008 history version date note ver: 1.0.0 26-may-2008 first release.

  • Page 3: Contents

    M4-11-0002-100 - 3 - version: 1.0 – 2007/12/03 m26 evaluation board user guide contents 1 introduction .................................................................................................. 4 2 m26 evaluation board description.......................................................... 5 2...

  • Page 4: 1  Introduction

    M4-11-0002-100 - 4 - version: 1.0 – 2007/12/03 m26 evaluation board user guide 1 introduction this document describes the installation of m26 evaluation board and its accessory with the development tool kit. The m26 evaluation board provides users an environment to demonstrate various modes and feat...

  • Page 5

    M4-11-0002-100 - 5 - version: 1.0 – 2007/12/03 m26 evaluation board user guide 2 m26 evaluation board description 2.1 description m26 evaluation board provides usb, rs-232 interface; audio interface (handheld & hand-free) and rf connection for function control and calibration test. Both the connecto...

  • Page 6

    M4-11-0002-100 - 6 - version: 1.0 – 2007/12/03 m26 evaluation board user guide d. Mic1 (4): plug in the electret condenser microphones (ecm) if you want to verify the hand-free audio path e. Speaker (5): plug the speaker if you want to verify the hand-free audio path f. Rs232 (6): connect the rs-232...

  • Page 7

    M4-11-0002-100 - 7 - version: 1.0 – 2007/12/03 m26 evaluation board user guide (6) enter at command. M26 will automatically lock into the baud rate and reply to the pc with a ok.

  • Page 8

    M4-11-0002-100 - 8 - version: 1.0 – 2007/12/03 m26 evaluation board user guide (7) m26 is now ready for accepting at commands from the pc.