QL 10AFE-LT Operating manual

Summary of 10AFE-LT

  • Page 1

    12x8.63x10 13x11.63x13 18x19.63x14 18x14.63x12 14x20.5x12 15x24.5x15 20x28.5x14 20x33.5x16 30.5x22x25.4 33x29.5x33 45.7x50x35.5 45.7x37x30.5 35.5x52x30.5 38x61x38 52x72.4x35.5 52x85x40.63 * * * * quincy lab, inc. View setpoint (press) increase setpoint decrease se tpoint (3 sec.) enter/exit menu lev...

  • Page 2

    Page 2 a b c d fig. 1 * * * * view setpoint in o c / o f units (press) increase setpoint decrease setpoint (3 sec.) enter/exit menu levels fig. 2 set-up position unit in its ultimate operating location. Keep a minimum of 2" of airspace around the unit and a minimum of 10" above the unit. Important: ...

  • Page 3

    With microprocessor control & digital display model afe - lt low-temp series ovens operating manual insert quincy lab, inc. Chamber loading article or media processing times and temperature uniformity are largely dependent on load density and positioning. Load the oven so that the air circulation wi...

  • Page 4

    Level 3 * (press) (press) temperature tracking monitor on / off control calibration adjust set temperature lock off/on (off) (0 to 100%) read only (ssd) (rly) (upsc) (1r 2d) (1n 2n) (off) (off) (100) (100) (fs.Hi) (lt ch) (14) (7.5) (34) (2.5) (31) (0.0) (0.0) (-10 to +10) (0.0) (32) (tc j) ( ) (fac...

  • Page 5

    * release or press/hold displays variance (0.6 o c) * press/hold press once displays maximum * press/hold press once more displays minimum thermocouple burnout check sensor/wiring non-volatile memory error de-power briefly replace unit if it persists (press together to clear alarm condition) alarm c...