Volvo penta quality line marine water heaters owners manual.
1 mounting instructions if operations are performed incorrectly, this could result in personal injury, or damage to property or the water heater. Read the mounting instruction carefully before operating or ser vicing the water heater. If anything is unclear, please contact your volvo penta dealer fo...
2 fresh water plumbing connection for a better understanding of these instructions, please refer to the “plumbing connection diagram” found at the back of the booklet. 1. Connect water system to the pressure relief/ non return valve and then to the cold water inlet marked with a blue rubber washer (...
3 since all modern engines are cooled by a heat exchanger with a coolant, it is convenient to use the heated engine cooling water to feed the water heater’s coil (heat exchanger). Impor tant! Follow the engine manufac- turer’s instructions for the connection of the heat exchanger. The following inst...
4 problems and solutions warning! Before removing black plastic cap, be sure to turn off the electrical supply. When the engine does not heat the water: • check that there are no air locks inside the entr y pipe to the water heater’s coil. If any, unloosen escape valve (if mounted see plumb- ing con...
5 maintenance warning! Before removing black plastic cap, be sure to turn off the electrical supply. Periodically check electric connections and check that all the pipe fittings are watertight. Replace any corroded or damaged nut/bolt and screw fasten- ings. For any ordinar y maintenance follow the ...
6 accessories and spare par ts accessories 41103503-3 50% power reducer 41103504-1 1500w/220v heating element 41103505-8 thermostatic mixing valve kit 41103506-6 magnetic scale remover spare par ts 41103507-4 2 x 1/2" x 16 mm hose fitting kit 41103508-2 800w/220v heating element 41103509-0 thermosta...
1 english adjustable thermostatic mixing valve thank you for having chosen our adjustable thermostatic mixing valve. This kit permits the mixing valve to be easily mounted onto all ql water heaters. The kit contains: thermostatic mixing valve with ½" feminine fittings flexible stainless steel tube ½...
