1. DL manuals
  2. Qlink
  3. Motorcycle
  4. legacy 250
  5. User Manual

Qlink legacy 250 User Manual

Summary of legacy 250

  • Page 1

    Important safety information driver and passenger lg250 is designed only for one driver and one passenger. The total load must be within the limit specified on the specification label. Road condition the motorcycle is designed only for driving on paved roads. Read this manual carefully pay special a...

  • Page 2: To  Our  Customer

    To our customer thanks for choosing our motorcycle, lg250. For safe and pleasant driving, a complete understanding for all the instructions in this manual is necessary. Your safety is not only ensured by your own alertness and your understanding of all operations but also related to your understandi...

  • Page 3: Contents

    Contents traffic safety ..............................................................1 important information for safe driving...............2 load .............................................................................3 parts and controls .....................................................4...

  • Page 4: Contents

    Maintenance ............................................................26 air cleaner .............................................................26 cooling system maintenance ..............................28 radiator .............................................................28 coolant type ......

  • Page 5: Traffic  Safety

    Traffic safety safety can be ensured only by driver himself. Notices: a driver should always spend time on learning driving methods and technique before driving on the highway in less traffic area. 1.Many motorcycle accidents occur due to that automobile driver cannot see the motorcycle driver. Ther...

  • Page 6

    Important information for safe driving 1.Before starting the engine, carefully inspect the motorcycle. (refer to page 14). 2.For safety, wear helmet as well as boots, gloves, dust-tight glasses and noticeable clothing; 3.The rear box or cargo box mounted by customer himself is for lightweight things...

  • Page 7: Load

    Load warning: trunk or storage equipment etc., are for lightweight loads only. Max. Load capacity: 331lbs. Overload will affect the stability and controllability. All the loads should be secured firmly. Children or pets should not be carried on the bracket or trunk, e.G. Dog or cat. All the loads sh...

  • Page 8: Parts  And  Controls

    Parts and controls the assembling positions of controls panel and indicator audio box control system throttle grip air cleaner oil hole/oil dip rod main stand floor rest main switch steering lock vin the position marked with … …represents the invisible parts. 4 user's manual.

  • Page 9

    Rear brake locking device left grip fuel tank lock fuel tank seat lock tool box coolant overflow radiator vin plate floor pedal the position marked with … …represents the invisible parts. 5 user's manual.

  • Page 10: Panel  And  Indicator

    Panel and indicator the controls of each indicator light and alarming light are integrated in the panel. All the functions are instructed in the following pages. Temperature indicator speedometer odometer fuel indicator high beam indicator turning signal indicator (rh&lh) side stand parking indicato...

  • Page 11: Operation  Guide

    Operation guide main switch a) in this position, the engine will be shut down, all indicators will be off, and the key can be taken out. B)in this position, the engine and all indicators will be open, and the key cannot be taken out. Steering lock switch turn the handlebar to the upmost left, insert...

  • Page 12

    Temperature indicator the temperature indicator ① indicates the temperature of coolant. Side c indicates that the temperature is normal, while the red area of side h indicates that the temperature is high. In that case shut down the engine until the coolant temperature goes down. In case the tempera...

  • Page 13

    Headlight illumination switch ① press button, and the high beam is on. Press button, and the low beam is on. Turning light switch ② press the switch to , and left turning light is on. Press the switch to , and right turning light is on. Press down the button, and turning light will be off. Horn swit...

  • Page 14

    10 steering lock turn the handlebar ① to the upmost left. Insert key into steering lock and turn it clockwise by 180°(refer to p7), and lock the steering handle bar.Reverse the lock procedure to unlock. Note: before turning the key to lock, make sure to turn the handlebar to the upmost left, or key ...

  • Page 15

    Seat insert the key into the seat lock ①, turn it clockwise to open the seat. Lift the rear part of seat ②, and move backward to separate the seat from front hook, lift again, and the seat will be removed. 11 user's manual.

  • Page 16: Audio  Control  System

    Audio control system usb plug remove the seat (refer to p11), and toolbox cover ① can be seen. Open toolbox cover, and a standard usb port can be seen. Plug in flash memory stick, and enjoy music according to the following instruction. 12 panel and buttons 1.Pwr: power button. Press this button, and...

  • Page 17

    6. >: previous /next button. When mp3 is on, press this button for previous/next song when radio is on, press this button for previous/next-stored channel. 7. Vol -: press this button to reduce the volume. 8. Vol +: press this button to increase the volume. Maim performance parameter fm radio mp3 fr...

  • Page 18

    Inspection before driving to ensure the performance and safety, a routine inspection should be performed before drive. Fuel capacity once the fuel is insufficient, open the dust-proof cover ①, insert the key into fuel tank lock②,turn it clockwise, take out fuel tank cap ③, and then refill the fuel t...

  • Page 19

    Checking engine oil level 1.Park the motorcycle on a level surface and support it with its main stand. Remove oil dip rod ①, wipe it clean and insert it. Do not screw in. 2.If the oil level is at the lower limit ③, fill the crankcase with sae15w- 40/sf engine oil till the oil level is up to the uppe...

  • Page 20: Brake

    Brake front & rear brakes check the brake fluid level: brake fluid should be above the lower ① mark. Notice: use only dot3 or dot 4 brake fluid free play of the brake levers brake lever free play: 0.394~0.787" (at brake lever end) note: the free play of the brake lever should be 0.394 to 0.787" . If...

  • Page 21

    The brake lever span push off the brake lever ③, and separate the wrist pin ①from brake lever. Adjust the adjusting pin②. Choose position 1,2,3,or 4 to adjust the best brake lever span for driver's hand. Brake disk wearing replace the front and rear brake disk if the thickness is less than 0.118" re...

  • Page 22

    Tire this motorcycle is assembled with tubeless tires. Only tires marked with “tubeless tire applicable” can be used. Proper tire pressure will provide you maximum stability, comfort riding and longer tire life. Please check the tire pressure periodically and adjust if necessary. Note: check the tir...

  • Page 23

    Warning: over inflate will cause irregular wear of the thread, which may result in accident while low inflate pressure may cause the trip and make the tire come off the rim. Driving with excessively worn-out tire may cause danger due to decreased adhesion and steering stability. 19 when the tread he...

  • Page 24: Starting  The  Engine

    Starting the engine hold the rear brake lever to lock the rear wheel. Warning: rear wheel may run if it is not braked. A running wheel may cause injury. Note: release the start button as soon as the engine is started. Do not press the start button while the engine is running, otherwise the engine ay...

  • Page 25: Driving  The  Motorcycle

    Driving the motorcycle warning: during driving or after the engine has just stopped, the muffler is very hot. Contacting the muffler may cause serious burn. Therefore please wear trousers, avoid contracting the uncovered part of the muffler. Do not wear slack cloths, which may result in the sleeves ...

  • Page 26

    3) increase throttle forwards slowly, and the motorcycle will start to run. 4) turn throttle backwards for acceleration and release for deceleration. Warning: body injury may occur by contacting the running wheel. Do not accelerate the motorcycle sharply, which may result in losing control. Braking ...

  • Page 27

    Parking when you want to park the motorcycle, release the throttle, then engage the front and rear brakes simultaneously till the motorcycle is stopped. Turn the start key to “ ”, stop the engine. Step on the main stand with right foot, lift the motorcycle by holding the rear bracket and park the mo...

  • Page 28: Maintenance  Interval

    Maintenance interval the maintenance interval is based on the accumulated mileage and is the guideline for maintenance and lubrication of the motorcycle. The maintenance interval shall be shorter if the motorcycle always works in foul conditions at high speed. Please consult our local dealer for mai...

  • Page 29

    Maintenance interval table perform the instructions in the inspection before driving section(refer to p14) prior to each periodical maintenance. I: inspecting, cleaning, adjusting, lubricating or replacing when necessary. C: cleaning r: replacing a: adjusting l: lubricating note: * consult the local...

  • Page 30: Maintenance

    Maintenance air cleaner 1.Remove seat (refer to p11). 2.Remove screw ① and screw ②, separate clip ③ from frame,and remove rear left panel ④. 3.Remove front ventilation plate. (refer to p 32, picture 32) 4.Remove 4 tapping screws ⑤ and bolt ⑥, and remove triangle plate and decorative plate ⑦. Remove ...

  • Page 31

    5.Remove 5 screws ① of air cleaner box cover, and remove the cover ②. 6.Remove 2 screws ③, and filter element screen ⑤. 7.Take out air cleaner filter element ④. 8.Clean filter element with solvent. Dry the solvent from filter element. Dip the filter element with engine oil, and then dry it. Replace ...

  • Page 32

    Radiator radiator is located below the front ventilation plate. Clean dust and mud from the radiator periodically according to the road condition. Coolant type only use the high quality ethylene glycol based anti-freeze with erosion inhibitor, which is special for aluminum engines. This motorcycle h...

  • Page 33

    Engine oil recommended engine oil viscosity the viscosity of the engine oil shall be in accordance with the local climate condition. The figure on the right provided a guideline for selecting the engine oil viscosity for different atmospheric temperatures. Se grade sf grade sae10w-30 sae15w-40 sae20...

  • Page 34

    Replacing engine oil and cleaning oil screen engine oil capacity first filling: 1.0l replacing: 0.8l replacing engine oil replacing interval: first time at 620miles, then every 1860miles. Park the motorcycle with main stand and replace oil when the engine is still warm for complete drainage of the u...

  • Page 35

    Replacing gearbox oil recommended gearbox oil type: sae10w-30/se 1.Park motorcycle with main stand ①. Remove 5 bolts ②, remove engine left side cover ③. 2.Remove the filling bolt ④ and drain bolt ⑤.Drain the gearbox oil. 3.Clean drain bolt, install and tighten it. 4.Fill gear oil through the filling...

  • Page 36

    Spark plug type of spark plug: dp8ea (ngk) 、 d7rtc ( 1)remove cap and remove spark plug with wrench. (2)check the electrode and the central ceramic point for carbon deposit, or wearing. If necessary, replace the spark plug. Clean off the deposit with spark plug cleaning detergent or brush. (3)measur...

  • Page 37

    Replacing the fuse the main fuse is located on the starter relay under the seat on front right side, with rated current capacity of 20a. Remove starter relay coupler, and you will see it. Remove 6 screws ①on front ventilation plate ③. Remove front ventilation plate, fuse box ② will be seen. Rated cu...

  • Page 38

    Tools remove seat (p11), and you can see tool box cover ②. Open it, and you can see tools kit. These tools are enough for minor repairing, adjusting or part replacing. The tools kit includes: 34 0.32 × 0.39 " open end wrench 0.47 × 0.39 " open end wrench 0.55 × 0.67 " open end wrench s=6 internal he...

  • Page 39

    Vin number the serial number of the frame and the engine are used for registration, applying driving license and ordering parts. When order or replace parts, above numbers should be supplied. The frame number (vin) ② is located on the right of frame head, and label plate ① on the left. The engine nu...

  • Page 40: Guideline  For  Storage

    Guideline for storage storage if the motorcycle will be stored for a long time, such as in winter, necessary measures shall be taken to prevent damage or malfunction of parts. In addition, some maintenance is necessary. (1)replace the engine oil and the oil screen. (2)drain the fuel tank and carbure...

  • Page 41

    Reuse of the motorcycle 1.Remove the motorcycle cover and wipe it clean. If the motorcycle has been stored for more than 4 months, replace the engine oil. 2.Check the electrolyte's level. Charge the battery, if necessary. 3.Perform the procedures specified in inspection before driving (page 14) and ...

  • Page 42: Technical  Parameter

    Technical parameter dimensions length height width wheel base ground clearance 87.6" 43.7" 34.4" 58.7" 5.9" wet weight 366.2lbs crankcase/gearbox fuel tank max.Load type weight capacity engine single cylinder,water cooled, 4 stroke,vertical 0.264 gal /0.04 gal 4.5 gal 331lbs bore x stroke compressio...

  • Page 43

    Transmission final reduction ratio 8.63 battery alternator 12v-10ah ac magneto headlight brake/tail light fuse front turn light rear turn light pilot light turning signal light high beam light instrument indicator side stand indicator 12v35w/35w 12v-21w/5w 20a/10a/5a 12v 10wx2 12v 10wx2 12v 3w 12v 3...

  • Page 44: Electrical  Diagram

    Electrical diagram.