Qlogic 3200 Series User Manual - page 86
Manual is about: QConvergeConsole CLI
of
130
2–Configuring NIC
NIC Partition (NPAR)
2-40
SN0054671-00 A
In the example in
Figure 2-21
, function 2 is disabled. To enable the function,
NIC is selected from the Function Type menu.
Figure 2-21. Enabling a Physical Function
3.
Click Save Configuration.
4.
Reboot your system for the change to take effect.
5.
Open vCenter Plug-in.
6.
Click the QLogic Adapter tab.
7.
Right-click the adapter icon on the left side of the page, and then select
Refresh.