QOLSYS IQ Doorbell Quick Install Manual

OVERVIEW

IQ DOORBELL QUICK INSTALL GUIDE

SPECIFICATIONS

This is a quick guide for experienced installers only.  For a detailed installation manual refer to the documentation found on 

the “Documentation” tab on http://dealers.qolsys.com (login required, request access at PortalAccess@Qolsys.com) 

The IQ Doorbell is a great way to make the home’s existing doorbell unit “smarter”.  The IQ Doorbell 

wires effortlessly into an existing door bell using the included pre-stripped leads, and can support up 

to two separate doorbells, like the front and back door. Because each doorbell learns in as two 

different zones, you can program custom chimes and rules for each.

Sensor: 2.5”H x 1”W x .5”D 

Wireless signal range: 600ft (200M), open air. 

Code outputs: tamper, tamper restore, alarm, alarm 

restore, low battery.

Transmitter frequency: 319.5 MHz

Unique code ID

Supervisory keep-alive interval: 70 minutes. 

RF Peak field strength: typical 36000 uV/m at 3m

Operating Temperature: -10C~50C

Relative Humidity: 5-95% Non-Condensing 

Storage Temperature: -40-80C  

Replace battery with exact replacement every 5 years 

with 3V Lithium (x2).

(2)   -Panasonic CR2032

        -Energizer CR2032

        -Duracell DL2032

IQ Doorbell

QS1119-840

WIRING DIAGRAM

RED WIRE - FRONT

BLACK WIRE - TRANS

WHITE WIRE - REAR