Qoltec 53880 User Manual - page 4
Operational description
Name
Component drawing
Description
Output switch
Pushing it for more than 2 seconds, switch on/off
the inverter or output
AC input cord
or terminal
Plug it or connect it to wall socket or network
voltage when battery charges or supply the output
through AVR
Mains switch
or
Connect to network voltage and when power is
normal, turn on this switch, device will work on
mains mode, charging the battery;
Turn off this switch, device will switch over to
battery mode
Output socket
or terminal
or
Appliance connects to this socket or terminal for
output
Note: The max. power for single socket is 2000W
If your appliances power is more than 2000W,
please connect to terminal
Ventilation fan
In the battery mode or while charging, when the
power transistor temperature is higher than 45
o
C,
fan will start working
Battery input pole
Red battery input cable for positive pole, black
battery input cable for negative pole; pay attention
to the battery voltage, it must follow the device
marking
Installation and operation
1. Installation
1.1
If you open the package and notice damage, please contact distributor immediately;
1.2
Do not install the device upside-down; do not exposed to direct sunlight or heat source; keep out
of reach from children; keep away from water, moisture, oil or grease and any flammable
substance;
1.3
For better ventilation, fan outlet and device ventilation hole should have at least 10 cm distance
from the wall or from the other adjacent equipment which does not produce the heat;
1.4
Make sure that network voltage and frequency match the device rating;
1.5
The device should be placed in the well-grounded conditions to ensure the safety;
2. Battery connection: Connect the red cable to the battery “+” pole and connect the black cable to the
battery “-“ pole, because device cannot work at the wrong connection.
or