Www.Qpcom.Com user’s manual qp-a o24 24g 2.4 g hz; 24 dbi high performance die cast reflector.
I lives may be at risk ! Carefully observe these instructions and any special instructions that are included with the equipment you are installing. Important: look over the site before beginning any installation, and anticipate possible hazards, especially these: contacting power lines can be lethal...
I 2.4 ghz dbi reflector grid antenna installation instructions antenna components included: (1) antenna feedhorn assembly (1) feed reflector (1) small self-tapping screw (2) grid section halves (2) #m6 stainless steel u-bolts w/nuts, flat and lock washers (2) mast clamps (1) aluminum “l” bracket (4)...
Grid assembly “l” bracket install the (2) mast clamps on the u-bolts as shown and fasten to the “l” bracket using (4) lock washers and (4) nuts. To mount antenna assembly in a tilted position, attach (1) u-bolt assembly to either the fixed tilt positions or to the tilt slot (as shown) on the “l” bra...
