QPS que! m3 Quick Start Installation Manual - page 8
6
I N STA L L AT I O N
I N STA L L ATION (WINDOWS ME AND 2000)
Step 1: Turn on the power to your PC and all other
peripherals that are attached. Connect the Hi-Speed
USB 2.0 cable to the USB 2 . 0 port on the back of
your PC or Card. Attach the other end of the
Hi-Speed USB 2 . 0 cable to the USB 2 . 0 port on the
back of the Que! M3 Drive.
If you are installing the Que! M3 Drive on a notebook
PC equipped with a USB 2.0 port. Follow the directions in step 1, then to connect the
power adaptor, attach the round adapter plug to the power interface connector at the
back of the Que! M3 Drive. Then, connect the power plug to a power outlet.
Step 2: After making the necessary connections, wait for Windows ME or 2000 to
automatically detect your Que! M3 Drive and load the necessary drivers.
Windows may ask you for the Windows ME or 2000 CD. Just insert the
Windows ME or 2000 CD into the CD-ROM drive and Windows will automatically
load the USB Mass Storage drivers.
Congratulations! You can now drag & drop files to your Que! M3 Drive using Windows
Explorer.
If you need to partition and format your Que! M3 Drive, please refer to the Que! M3
Installation Manual CD.
For detail instructions in unplugging your Que! M3 Drive, please refer to the Que! M3
Installation Manual CD.
Note: Please refer to Que! M3 Installation Manual CD for complete installation version.
Que M3 manual 8/23/01 7:03 PM Page 8