QRO Technologies HF-2000 Instruction Manual - page 2
2
SPECIFICATIONS
Band Coverage:
160, 80, 40, 20, 17, and 15 (12 & 10 export only) meter
amateur bands. 12 & 10 meter also useable in USA with
proof of license and user modification.
Drive Power Required:
120 Watts Typical
Maximum Output Power:
1,500 Watts SSB, 1250 Watts CW, 800 Watts RTTY, FM,
SSTV
Duty Cycle:
100% SSB Continuous Voice Modulation
80% CW
50% RTTY, FM, SSTV.
Continuous Carrier (Dead Key) 15 minute time limit at 800
watts with Auxiliary cooling
Automatic Limiting
Control (ALC):
0 to -20 Volts negative going, adjustable from Front Panel
Harmonic Suppression:
2nd at least -45 db; 3rd - 10th at least -50db
Keying:
Requires contact closure or sink of +12 VDC @ 80 ma
Input Impedance:
50 ohms unbalanced
Output Impedance:
50 ohms unbalanced with SWR 2:1 or less
Tube Requirement (2):
3-500Z, 3-500ZG, 3-500C
Power Line Requirement:
120 VAC, 50/60 Hz at 20 amperes maximum
240 VAC, 50/60 Hz at 10 amperes maximum
Front Panel:
Multimeter (Plate Voltage, Plate Current, Power
(See Front Panel Pictorial)
Output PEP, Relative ALC)
Grid Current Meter
Multimeter Function Switch
Transmit LED Indicator
Power LED Indicator
Power On/Off Switch
Tune & Load Controls with 6-1 Reduction Drives
Bandswitch
Rear Panel:
RF Input (SO-239)
(See Rear Panel Pictorial)
RF Output (SO-239)
Transmit Keying Line (RCA Phono Socket) or
+15 V Supplied by Transceiver on Transmit (RCA Phono Socket)
ALC Output (RCA Phono Socket)
Tuned Input Adjustments (160, 80, 40, 20, 17, 15,
12, and 10 meters)
Ground Post
Fuses (two 20 ampere for 100/120 VAC or two 10
ampere for 200/240 VAC)
Dimensions:
18w x 15d x 8-1/2h (Inches)
45.7w x 38.1d x 21.6h (Centimeters)
Net Weight:
76 lbs. or 34.5 kgs.