Acousticdesign (ad) quick start guide model: ad-p6t 1001015-01 *1001015-01*.
Explanation of symbols the term “warning” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death. The term “caution” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in equipment damage to...
Suspend the loudspeaker warnrng!: do not attach the snap hook to the loudspeaker or any other load until the hanger cable has been anchored to a suitable structural member. 1. Insert the wire cable into the appropriate hole in the connector (see figure 1). The connector’s two holes are directional, ...
Specifications ad-p6t lf transducer 165 mm (6.5 in) weather treated paper cone woofer hf transducer 19 mm (0.75 in) aluminum dome tweeter rated noise power (1) 60 watts / 31 v rms nominal impedance 16Ω transformer taps 70v: 60, 30, 15, 7.5 w 100v: 60, 30, 15 w effective frequency range (2) 56 hz–20 ...
