En acousticdesign tm surface-mount loudspeaker user manual ad-s28tw dual 200 mm (8 in) bandpass subwoofer td-000287-00-b *td-000287-00-a*.
En important safety precautions 1 - read these instructions. 2 - keep these instructions. 3 - heed all warnings. 4 - follow all instructions. 5 - clean only with a dry cloth. 6 - install in accordance with all qsc instructions and documentation. Suspension and mounting should be attempted only by th...
En introduction congratulations and thank you for your purchase of this subwoofer. The ad-s28tw model offers excellent acoustic perfor- mance in an easy-to-install and attractive enclosure. Please review these instructions and carefully follow the recommenda- tions. Consult a licensed installation p...
En attaching the feet locate the four m6 attachment points on the bottom of the sub. Consult the following illustrations and pay careful attention to which attachment points are correct. Installation options the ad-s28tw has been designed for installation flexibility. The subwoofer may be mounted us...
En mounting the subwoofer using the yoke the yoke can be used to mount the subwoofer either on a vertical surface, like a wall, or from an overhead surface, like a ceiling or ceiling beams. In either case, the attachment points on the enclosure for securing the yoke are the same. The yoke is designe...
En suspending the subwoofer using eyebolts and shear plates the subwoofer can be suspended using the included eyebolts. There are three possible orientations for installing the sub- woofer this way. 1. Port facing laterally, subwoofer in “wide” orientation 2. Port facing laterally, subwoofer in “nar...
En shear plates align the mounting hole of the shear plate with the enclosure attachment point with the rubber pad between the plate and the cabinet. Place the attachment hardware according to the illustration. Tighten the hex-head bolts enough to hold the shear plate in place but leave it just loos...
En wiring signal to the subwoofer the input terminal is on the rear of the subwoofer and is covered by a hinged door. Open the door to expose the screw terminals. There are four sets of screw terminals arranged in positive/negative pairs for parallel wiring. One pair is labeled for input (receive si...
En specifications ad-s28tw frequency response 1 : 42 - 165 hz (-3 db), 36 - 205 hz (-10 db) maximum output 2 : 118 db spl continuous rms output (calculated) 124 db spl peak output transducers: dual 8 inch (200 mm) weather resistant, polypropylene cone woofer, rubber surround impedance (ohm): 8.0 n o...
En ad-s28tw dimensions 254 mm (10.0) 50 mm (1.9) 574 mm (22.6) 394 mm (15.5) 10 mm (0.4) 125 mm (4.9) 251 mm (9.9) 404 mm (15.9) 109 mm (4.3) 114 mm (4.5) 574 mm (22.6) 288 mm (11.3) 125 mm (4.9) 251 mm (9.9) 404 mm (15.9) 603 mm (22.75) 10
En ad-s28tw yoke dimensions 18 mm (0.7) 400 mm (15.75) 28 mm (1.1) 64 mm (2.5) 127 mm (5.0) 405 mm (15.9) 203 mm (8.0) 13 mm (0.5) 11.
En how to contact qsc audio products, llc cómo comunicarse con qsc audio products, llc comment prendre contact avec qsc audio products, llc kontaktinformationen für qsc audio prodcuts, llc qsc audio products, llc mailing address: qsc audio products, llc 1675 macarthur boulevard costa mesa, ca 92626-...
