Acousticdesign™ series user guide s8t – 8" two-way, foreground/background loudspeaker with 70/100v transformer s10t – 10" two-way, foreground/background loudspeaker with 70/100v transformer s12 – 12" two-way, foreground/background loudspeaker td-000329-01-a td-000329-01.
2 td-000329-01-a explanation of symbols the term “ warning! ” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “ caution! ” indicates instructions regarding possible damage to physical equipment. If these instru...
3 td-000329-01-a warranty (usa only; other countries, see your dealer or distributor) qsc audio products 3 year limited warranty qsc audio products, llc (”qsc”) guarantees its products to be free from defective material and/or workmanship and will replace defective parts and repair malfunctioning pr...
4 td-000329-01-a set the transformer tap switch refer to figure 1 1. Insert a 4mm fl at-tip screwdriver into transformer tap hole and engage the slot. 2. At fully clockwise the transformer is in 8 -bypass. S10t s8t mount the loudspeakers install the x-mount™ bracket refer to figure 4 warning!: insta...
5 td-000329-01-a adjust the angle of the x-mount™ bracket refer to figure 5 note: this step may be done now or after mounting the loudspeaker. 1. Use a 5mm hex wrench to loosen the adjustment locking screws. 2. Orient the bracket as necessary. 3. Tighten the adjustment locking screws. — figure 5 — -...
6 td-000329-01-a mount the loudspeaker on the bracket refer to figure 6 . Note: the loudspeaker can be placed on the mount in any direction (up, down, left, right). 1. Align the "x" slot with the x-mount™ bracket and push the loudspeaker onto the bracket. (1) 2. When seated, pull the loudspeaker dow...
7 td-000329-01-a install the weather cover (optional) refer to figure 8 1. Slide the nut (1), compression gasket (2), and weather cover / gasket (3) over the wiring for the loudspeaker. 2. Terminate the wiring to the euro-style connector, refer to "wire the loudspeaker" on page 7 3. Install the euro...
8 td-000329-01-a s12 dimensions — figure 10 — 5 96 mm (2 3.4 in) 354 mm (13.9 in) 354 mm (13.9 in) 3 2 3 mm (1 2.7 in) 323 mm (12.7 in) 5 96 mm (2 3.4 in).
9 td-000329-01-a s10t dimensions — figure 11 — 318 mm (12.5 in) 2 98 mm (1 1.7 in ) 318 mm (12.5 in) 5 1 6 mm (2 0.3 in) 298 mm (11.7 in) 5 1 6 mm (2 0.3 in).
10 td-000329-01-a 8t dimensions — figure 12 — 254 mm (10 in) 2 5 1 mm (9.9 in) 254 mm (10 in) 440 mm (1 7.3 in) 254 mm (10 in) 440 mm (1 7.3 in).
11 td-000329-01-a specifi cations s8t s10t s12 confi guration 8” 2-way with transformer 10” 2-way with transformer 12” 2-way transducers low-frequency high-frequency 1” exit / 1.4” voice-coil compression driver 8” weather resistant paper cone woofer, 2.0” / 50 mm voice-coil 1” exit / 1.4” voice-coil...
Mailing address: qsc audio products, llc 1675 macarthur boulevard costa mesa, ca 92626-1468 usa telephone numbers: main number: (714) 754-6175 sales & marketing: (714) 957-7100 or toll free (usa only) (800) 854-4079 customer service: (714) 957-7150 or toll free (usa only) (800) 772-2834 facsimile nu...
