QSC AcousticDesignAD-S52 Specifications
The QSC AcousticDesign AD-S52 is a full range,
surface mount loudspeaker with sleek, contemporary
styling that fits perfectly into multiple environments
and applications including hotels, restaurants,
convention facilities, and multimedia environments.
The loudspeaker’s low-frequency driver is magnetically
shielded, making the AD-S52 perfect for use near
video monitors. Available in black or white, these great
sounding, weather resistant enclosures can be painted
to match any specific decor.
The AD-S52 is a high output, 2-way design
incorporating a 5.25" weatherproof, LF transducer and
a 1" neodymium tweeter. This exceptional loudspeaker
carries the added benefit of built-in dynamic power
protection—thus ensuring system reliability in the
event of overload conditions.
The AD-S52T models are equipped with a 70/100 volt
matching transformer for distributed audio systems.
There is a transformer tap switch on the rear panel
for setting the power level of the loudspeaker. This
switch may also be set for 8 ohm operation, bypassing
the transformer completely—providing greater system
flexibility compared to most competing products.
The AD-S52 system package includes a ball mount
assembly for convenient installation of the enclosure
in a wide variety of orientations. If desired, the ball
mount adapter’s back plate can be removed, reducing
the overall depth of the assembly and the footprint of
the mount on the wall. Further, the assembly includes
a weather resistant input connection cover to protect
the 5-way binding post input terminals.
Specifications
AD-S52
AD-S52T
Configuration
Compact 2-way, ported enclosure Compact 2-way, ported enclosure
Transducers
Low-frequency Transducers
5.25" shielded
5.25" shielded
High-frequency Transducer
1" neodymium tweeter
1" neodymium tweeter
Frequency Range
1
Frequency Response (-6 dB)
75 Hz – 19 kHz
75 Hz – 19 kHz
Useable Frequency Range (-10 dB) 60 Hz – 20 kHz
60 Hz – 20 kHz
Maximum Output
2
Calculated Peak Output
110 dB SPL
107 dB SPL
Calculated Continuous Output
104 dB SPL
101 dB SPL
Nominal Impedance
8Ω
8Ω switchable
Power Rating
RMS Power Handling
3
60 W (100 hours IEC)
60 W (100 hours IEC)
Recommended Max Amp Power
120 W RMS
120 W RMS
Sensitivity
86.5 dB, 2.83V, 1 m, free field (4π) 86 dB, 2.83V, 1 m, free field (4π)
Nominal Coverage (HV)
90° x 90°
90° x 90°
Transformers
Type
−
Custom low distortion laminated core,
wide bandwidth design
Taps
−
70V: 30, 15, 7.5, 3.75 W
100V: 30, 15, 7.5 W
Enclosure
Material
Injection molded, weather resistant, high impact polystyrene
Finish
White or black (paintable)
Weather Resistant
Yes
Grille
Heavy duty powder coated aluminum
Connectors
Pair of 5-way binding posts
Mounting Hardware
Included ball mount assembly; optional yoke mount bracket available
Weight - Net / Shipping
15 lb (6.8 kg) / 22 lb (10 kg)
18 lb. (8.2 kg) / 25 lb (11.4 kg)
1) All frequency ranges specified refer to measured free field response (full space, 4π)
2) Calculated SPL at 1m, (full space, 4π), speaker operating at rated RMS power with 6 dB crest factor pink noise input, 50 Hz – 20 kHz
3) Maximum input power tested in accordance with IEC 268-5 recommendations, 80 Hz – 20 kHz band limiting, 6 dB signal crest factor
AD-S52
AcousticDesign™ Loudspeaker
Features
• 5.25", 2-way design—in a lightweight, contemporary styled
multipurpose enclosure
•Magnetically shielded LF transducer—ideal for use near
video monitors
• Flexible ball mount assembly included—for convenient installation
•70/100 volt transformer versions available—for use with
distributed audio systems
•Optional yoke mount bracket available