- DL manuals
- QSC
- Speakers
- ILA System v2
- User Manual
QSC ILA System v2 User Manual
Summary of ILA System v2
Page 1
User manual wl2082-i – full-range line array loudspeaker wl118-sw – subwoofer line array loudspeaker fb2082-i – array frame eb2082-i – extension bar pb2082-i – pull-back bar gs115-sw – ground stack kit *td-000218-00* td-000218-00-e ila system v2.
Page 2
1 2 important safety precautions and explanation of symbols install in accordance with instructions by qsc audio products, llc instructions and under the supervision of a licensed professional engineer. Warning! Before placing, installing, rigging, or suspending any speaker product, inspect all hard...
Page 3
1 2 introduction the installation line array (ila) is a high performance line array system designed for the needs of houses of worship, performing arts facilities and a multitude of other venue types. The current ila family is composed of the wl2082-i line array element, wl118-sw subwoofer, fb2082-i...
Page 4
3 4 introduction (continued) wl118-sw the wl118-sw subwoofer extends the system’s low-frequency capability to 35 hz. Its ceramic magnet, 4 " voice coil, 18 " transducer provides 850 watt continuous power handling capability. Many users of line array systems have found that suspending the subwoofers ...
Page 5
3 4 introduction (continued) fb2082-i array frame shackle holes (accept 3/4 1. " (20 mm) screw pin anchor shackle) center support bar 2. Rigging plates 3. Rigging plate retaining bolts 4. Rigging plate attachment holes 5. Warning! Use only shackle holes for suspension of array! 1 2 3 4 5 1 2 3 4 1 3...
Page 6
5 6 rigging the installation line array rules for suspension correct use of all suspension hardware and components is imperative in sound system rigging and deployment. • always calculate suspended loads before lifting to ensure suspension components and hardware are used within their respective loa...
Page 7
5 6 attaching wl2082-i to array frame (figure 1) before beginning any installation, have your system designer calculate the proper splay angles using qsc’s ease focus (array calculator). All orientation of product is to be as viewed from the rear of the enclosure. Attach the array frame to the suspe...
Page 8
7 8 rigging the installation line array (continued) extension bar (figure 3) the extension bar rigging plates can be moved, if required, by removing the two 7/8 " mount- ing bolts, moving to the selected mounting location, and reattaching. Tightening torque is to be 100 lb-ft of torque (135.6 n-m) e...
Page 9
7 8 rigging the installation line array (continued) attaching the gs115-sw ground stack rails to a wl118-sw (figure 7) for all four rigging straps: using an 6 mm hex wrench, remove the upper and lower rigging strap retaining bolts and loosen the two bolts in between. Pull the inner and outer straps ...
Page 10
9 10 rigging the installation line array (continued) attaching wl118-sw behind wl2082-i array using eb2082-i (figure 9) it is sometimes necessary to suspend the subwoofers behind the main array. Extreme splay angles may result in physical interference with rear-flown subwoofers. Attach both array fr...
Page 11
9 10 wl2082-i controls and connections mode selection switch (figure 11) bi amp: when set to bi amp, an internal shading network removes the mid frequencies from one of the low-frequency drivers. The bi amp horizontal shading switch will select which transducer is shaded. Tri amp: shading network is...
Page 12
11 12 nl4 connectors pin band-pass 1+ subwoofer + (8 ohms) 1- subwoofer - (8 ohms) 2+ thru (+lf) 2- thru (-lf) wl118-sw connections input connections the wl118-sw input connectors are a pair of neutrik nl8s wired in parallel for use in a 4-way system. A pair of neutrik nl4's in parallel are added fo...
Page 13
11 12 wl2082-i / wl118-sw specifications specifications subject to change without notice. Wl2082-i wl118-sw configuration 3-way, bi-amp or tri-amp mode direct radiating vented box transducers high-frequency low-frequency dual 50 w, 8 Ω 1" exit, 1.75" titanium diaphragm, neodymium magnet assembly dua...
Page 14
13 14 wl2082-i dimensions working load limit information component weight 7:1 design factor 10:1 design factor 12:1 design factor wl118-sw loudspeaker 111 lb (50.5 kg) 740 lb (336.4 kg) 518 lb (235.5 kg) 432 lb (196.2 kg) 27.7" (703 mm) 25.9" (658 mm) 22.2" (563 mm) 20.2" (512 mm) 20.7" (525 mm) 1.9...
Page 15
13 14 eb2082-i specifications material aluminum 6061-t6 finish black powder coat (white optional) working load limit information component weight 7:1 design factor 10:1 design factor 12:1 design factor eb2082-i extension bar 38 lb (17.3 kg) 1714 lb (779.2 kg) 1200 lb (545.5 kg) 1000 lb (454.5 kg) 47...
Page 16
15 16 fb2082-i specifications material aluminum 6061-t6 finish black powder coat (white optional) working load limit information component weight 7:1 design factor 10:1 design factor 12:1 design factor fb2082-i array frame 17 lb (7.7 kg) 740 lb (336.4 kg) 518 lb (235.5 kg) 432 lb (196.2 kg) 4.8" (12...
Page 17
15 16 pb2082-i specifications material aluminum 6061-t6 finish black powder coat (white optional) working load limit information component weight 7:1 design factor 10:1 design factor 12:1 design factor pb2082-i pull-back bar 6 lb (2.7 kg) 423 lb (192.2 kg) 296 lb (134.5 kg) 247 lb (112.1 kg) 27.5" (...
Page 18
17 18 gs115-sw specifications material aluminum 6061-t6 finish black powder coat (white optional) weight 5 lb (2.3 kg) per set 29.0" (737 mm) 10.75" (273.1 mm) 10.75" (273.1 mm) 0.25" (6.4 mm) 1.5" (38 mm) 2.0" (51 mm) 2.8" (71 mm) 3.75" (95.3 mm) 2.0" (51 mm).
Page 19
17 18 mailing address: qsc audio products, llc 1675 macarthur boulevard costa mesa, ca 92626-1468 usa telephone numbers: main number: (714) 754-6175 sales & marketing: (714) 957-7100 or toll free (usa only) (800) 854-4079 customer service: (714) 957-7150 or toll free (usa only) (800) 772-2834 facsim...
Page 20
Passionate about sound.