- DL manuals
- QSC
- Speakers
- ISIS 102M
- User Manual
QSC ISIS 102M User Manual - page 18
EN
18
ISIS 102M Performance Curves (ISIS W-102M similar)
SPL (
d
B)
Frequency (Hertz)
Impedance
Vertical
ISIS 102M Full Range (passive) Setting, Response and Impedance vs. Frequency
On Axis
30° Off Axis
Beam
wi
dth (
deg
ree
s)
Horizontal
Frequency (Hertz)
ISIS 102M Full Range (passive) Setting, Horizontal and Vertical Beamwidth vs. Frequency
Impe
dan
ce (o
hms)
Summary of ISIS 102M
Page 1
*td-000119-00* isis-series loudspeakers isis w-102m and isis 102m 10” two-way, medium dispersion isis w-102w and isis 102w 10” two-way, wide dispersion isis w-122m and isis 122m 12” two-way, medium dispersion isis w-152m and isis 152m 15” two-way, medium dispersion user manual en td-000119-00 rev.B.
Page 2
En 2 important safety precautions & explanation of symbols 1- read these instructions. 2- keep these instructions. 3- heed all warnings. 4- follow all instructions. 5- clean only with a dry cloth. 6- install in accordance with qsc audio product’s instructions and a licensed, professional engineer. 7...
Page 3
En 3 introduction thank you and congratulations on your purchase of qsc’s isis multipurpose loudspeakers. These products represent the state-of- the-art in lightweight sr (sound reinforcement) loudspeaker systems. To get the most from your investment, we encourage you to review this manual carefully...
Page 4
En 4 coverage angles 102m/122m/152m- these models are equipped with 60° conical waveguides. Hf coverage remains constant regardless of cabinet orientation. 102w- before mounting the loudspeaker, determine the mounting orientation and desired coverage angles. As supplied from the factory, the loudspe...
Page 5
En 5 select the desired crossover mode all models are equipped with a crossover mode switch. Before using, set the crossover mode switch to the desired position using a flat-tip screwdriver. The switch has a slot- ted shaft; insert the screwdriver tip into the slot and turn the shaft so the slot poi...
Page 6
En 6 recommended fastener torque fly track to cabinet-4.52 nm (40 in-lb) pole cup to cabinet- 1.92 nm (17 in-lb) waveguide to cabinet- 1.92 nm (17 in-lb) lf driver to cabinet- 1.92 nm (17 in-lb) grill to cabinet-1.01 nm (9 in-lb) connector plate to cabinet-1.01 nm (9 in-lb) all fasteners should be c...
Page 7
En 7 isis 102m dimensions (isis 102w similar) specifications are subject to change without notice..
Page 8
En 8 isis w-102m dimensions (isis w-102w similar) specifications are subject to change without notice..
Page 9
En 9 isis 122m dimensions specifications are subject to change without notice..
Page 10
En 10 isis w-122m dimensions specifications are subject to change without notice..
Page 11
En 11 isis 152m dimensions specifications are subject to change without notice..
Page 12
En 12 isis w-152m dimensions specifications are subject to change without notice..
Page 13
En 13 isis 102m and isis w-102m specifications 102m full range specifications (crossover mode switch set to full range, passive) frequency range (free field) frequency response (-6 db) 60-19k hz usable frequency range (-10 db) 50-20k hz maximum output calculated continuous rms output 118 db spl calc...
Page 14
En 14 isis 102w and isis w-102w specifications full range specifications (crossover mode switch set to full range, passive) frequency range (free field) frequency response (-6 db) 60-20k hz usable frequency range (-10 db) 50-21k hz maximum output calculated continuous rms output 117.5 db spl calcula...
Page 15
En 15 isis 122m and isis w-122m specifications full range specifications (crossover mode switch set to full range, passive) frequency range (free field) frequency response (-6 db) 60-19k hz usable frequency range (-10 db) 50-20k hz maximum output calculated continuous rms output 120 db spl calculate...
Page 16
En 16 isis 152m and isis w-152m specifications full range specifications (crossover mode switch set to full range, passive) frequency range (free field) frequency response (-6 db) 55-20k hz usable frequency range (-10 db) 45-20.7k hz maximum output calculated continuous rms output 120.5 db spl calcu...
Page 17
En 17 this page is intentionally blank so that each model’s performance curves appear on facing pages..
Page 18
En 18 isis 102m performance curves (isis w-102m similar) spl ( d b) frequency (hertz) impedance vertical isis 102m full range (passive) setting, response and impedance vs. Frequency on axis 30° off axis beam wi dth ( deg ree s) horizontal frequency (hertz) isis 102m full range (passive) setting, hor...
Page 19
En 19 isis 102m performance curves (isis w-102m similar) isis 102m bi-amp setting, individual driver response and impedance vs. Frequency isis 102m bi-amp setting, response vs. Frequency with recommended signal processing 1 (1) qsc dsp configurations with the recommended signal processing are availa...
Page 20
En 20 isis 102w performance curves (isis w-102w similar) spl ( d b) frequency (hertz) impedance vertical isis 102w full range (passive) setting, response and impedance vs. Frequency on axis 50° off axis horizontal frequency (hertz) isis 102w full range (passive) setting, horizontal and vertical beam...
Page 21
En 21 isis 102w performance curves (isis w-102w similar) isis 102w bi-amp setting, individual driver response and impedance vs. Frequency isis 102w bi-amp setting, response vs. Frequency with recommended signal processing 1 (1) qsc dsp configurations with the recommended signal processing are availa...
Page 22
En 22 isis 122m performance curves (isis w-122m similar) spl ( d b) frequency (hertz) impedance vertical isis 122m full range (passive) setting, response and impedance vs. Frequency on axis 30° off axis horizontal frequency (hertz) isis 122m full range (passive) setting, horizontal and vertical beam...
Page 23
En 23 isis 122m performance curves (isis w-122m similar) isis 122m bi-amp setting, individual driver response and impedance vs. Frequency isis 122m bi-amp setting, response vs. Frequency with recommended signal processing 1 (1) qsc dsp configurations with the recommended signal processing are availa...
Page 24
En 24 isis 152m performance curves (isis w-152m similar) spl ( d b) frequency (hertz) impedance vertical isis 152m full range (passive) setting, response and impedance vs. Frequency on axis 30° off axis horizontal frequency (hertz) isis 152m full range (passive) setting, horizontal and vertical beam...
Page 25
En 25 isis 152m performance curves (isis w-152m similar) isis 152m bi-amp setting, individual driver response and impedance vs. Frequency isis 152m bi-amp setting, response vs. Frequency with recommended signal processing 1 (1) qsc dsp configurations with the recommended signal processing are availa...
Page 26
En 26 notes:.
Page 28
How to contact qsc audio products cómo comunicarse con qsc audio products comment prendre contact avec qsc audio products kontaktinformationen für qsc audio products 联系 qsc audio products mailing address: qsc audio products, inc. 1675 macarthur boulevard costa mesa, ca 92626-1468 usa telephone numbe...