QSC K8.2 Mounting Quick Start Manual
K.2 Series
Yoke Mounting Quick Start Guide
EXPLANATION OF SYMBOLS
The term “
WARNING!
” indicates instructions regarding personal safety. If the instructions are not followed the result may be
bodily injury or death.
The term “
CAUTION!
” indicates instructions regarding possible damage to physical equipment. If these instructions are not
followed, it may result in damage to the equipment that may not be covered under the warranty.
The term “
IMPORTANT!
” indicates instructions or information that are vital to the successful completion of the procedure.
The term "
NOTE
" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNRNG!:
These mounting brackets shall only be used with K.2 Series loudspeakers. Use with other
apparatus could result in instability and possible injury.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Only use attachments/accessories specified by the manufacturer.
6. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, or has been dropped.
7. Adhere to all applicable, local codes.
8. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical
equipment installation.
9. Before placing or installing any loudspeaker product, inspect all hardware, cabinets, transducers, brackets and
associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could
significantly reduce the strength of the installation and should be immediately corrected. Use only hardware which is
rated for the loading conditions of the installation and any possible short-term unexpected overloading. Never exceed
the rating of the hardware or equipment.
TD-000524-00-A
*TD-000524-00*