QSC KLA12 Quick Start Manual - page 2
2
Attaching KLA12 Loudspeakers Together
.
1. Makesurethattheleverslabeled"B"areup,andslides
(1)
aredownonbothsidesofthebottomloudspeaker
(Figure 1)
.
2. PlaceoneKLA12ontopaKLA12.Nestthefourfeet
(1)
onthetopunitintothefeetreceptacles
(2)
onthebottomunit
(Figure 2)
.Makesurethe
surfacesarealignedandparallel.Formorethanatwo-boxKLA12assembly,pleaseseetheKLA12UserManual.
3. Onthebottomloudspeaker,pushbutton"A".Slide
(1)
automaticallymovesto
Up Position
.Rotatelever"B"downto
Locked Position
.
WARNRNG!:
Make sure the loudspeakers are properly aligned, and the lever locks in the down, locked position. Lift array to
confirm assembly.
Install K / KLA M10 KIT in Integrated Suspension Points
TheK/KLAM10kitissoldseparatelyandavailablefromQSCAudio.
WARNRNG!:
A single KLA array can consist of a
maximum of two KLA181, or five KLA12, or two KLA181
and five KLA12 loudspeakers. The weight of any single
array shall not exceed 480 lbs. (218 kg).
1. Removetherubberplug
Figure 4
(1)
.
2. Installthreewashers
Figure 4
(2)
andthreeeyebolts
Figure 4
(3)
.
Tightenuntilsnug.
3. Continuetorotatetheeyeboltsuntiltheyreachthedesiredposition.
Donotovertighten.
4. Suspendthearrayfromthesuspensionstructureusinganappropriatesling,cable,etc.
— Figure 1 —
1
— Figure 2 —
Parallel
Parallel
1
2
— Figure 3 —
PUSH "A"
1
B
SLIDES UP
ROTATE DOWN
— Figure 4 —
1
2
3