QSC MH-1075C-F User Manual

Summary of MH-1075C-F

  • Page 1

    Mh-1075c-f cinema loudspeaker user manual flyable 10” mid, large format high frequency compression driver cinema mid/high system td-000370-00-a *td-000370-00*.

  • Page 2: Explanation of Symbols

    2 explanation of symbols the term “warning!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “caution!” indicates instructions regarding possible damage to physical equipment. If these instructions are not foll...

  • Page 3: Introduction

    3 introduction the mh-1075c-f system provides the mid, and high-frequency components of a dcs 3-way loudspeaker system. It is designed specifically for large format cinemas and other applications where a point source surround channel or screen channel must be suspended or flown rather than mounted o...

  • Page 4: Connections

    4 connections amplifier connections to the mh-1075c-f are made on the rear panel via a neutrik® nl4p speakon™ connector supplied by the installer. This 4-conductor connector provides power to both the mf and hf sections of the mh-1075c-f. The standard configuration, as shipped from the qsc factory, ...

  • Page 5: Dimensions

    5 dimensions — figure 4 — 31.5" (800.1 mm) 19" (482.6 mm) 37" (939.8 mm) 40" (1016 mm) 15" (38.1 mm) 13" (330.2 mm) 3" (76.2 mm) 28.5" 723.9 mm 2 x 1.5" 2 x 38.1 mm.

  • Page 6: Specifications

    6 specifications mh-1075c-f frequency range 250 hz – 16 khz maximum output (full space / watt / 1 meter) passive bi-amp mode active tri-amp mode mid-/high-frequency 135.5 db spl mid-frequency 135.5 db spl high-frequency 133 db spl impedance 8Ω nominal, mid-frequency and high-frequency maximum input ...

  • Page 7

    Contact mailing address qsc audio products, llc 1675 macarthur boulevard costa mesa, ca 92626-1468 u.S. Main number (714) 754-6175 world wide web www.Qsccinema.Com www.Qscaudio.Com sales & marketing voice (714) 957-7100 international toll free (u.S. Only) (800) 854-4079 fax (714) 754-6174 e-mail inf...