1. DL manuals
  2. QSC
  3. Pager
  4. PS?1600H
  5. User Manual

QSC PS?1600H User Manual

Manual is about: Sixteen-Button Page Station Sixteen Command-Button Page Station Four Command-Button Page Station

Summary of PS?1600H

  • Page 1

    ™ hardware user manual ps‑1600(h/g) – sixteen-button page station ps‑1650(h/g) – sixteen command-button page station ps‑800(h/g) – eight command-button page station ps‑400(h/g) – four command-button page station td-000324-01-b *td-000324-01*.

  • Page 2

    2 explanation of terms and symbols the term “warning!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “caution!” indicates instructions regarding possible damage to physical equipment. If these instructions ar...

  • Page 3: Fcc Statement

    3 fcc statement note!: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate...

  • Page 4: Package Contents

    4 package contents h model n model part qty part qty 1. Q-sys page station h model 1 1. Q-sys page station g model 1 2. Hardware user manual 1 3. Page station quick start guide 1 4. Connector ship kit 1 5. Connector ship kit 1 a. 6-pin euro plug 1 b. 6-pin euro plug 1 c. 3-pin euro plugs 2 d. 3-pin ...

  • Page 5: Introduction

    5 introduction q-sys is a platform of software and hardware products providing system designers and operators with the tools necessary to design, configure, and manage medium to large scale audio systems. In addition to the primary signal processing and system management components that make up a q-...

  • Page 6

    6 inputs and outputs the rear panel of the page station offers a variety of auxiliary audio i/o interfaces and gpio for expanding its capability. The auxiliary audio inputs can accommodate accessories such as a secondary microphone or an mp3 audio source. The page station auxiliary output can drive ...

  • Page 7: Features

    7 features q‑sys ps‑1600h and n front panel refer to figure 2 . To see the keypad configurations of page station models ps-1650, ps-800, and ps-400 , see page 16. — figure 2 — 1 2 3 4 5 6 7 8 9 1. Led touch indicators 2. Capacitive touch keypad 3. Busy and ready indicators for command buttons 4. But...

  • Page 8

    8 led touch indicators when a key is pressed, the led on that key illuminates to indicate that it was pressed. Capacitive touch keypad • command buttons can be assigned one of several different types of commands using the q-sys designer administration interface. Once assigned, you just have to press...

  • Page 9

    9 magnetic microphone docking plate the q-sys page station uses a magnetic docking plate to hold the hand-held microphone. Just place the back of the microphone up against the plate and let it go! Available with hand-held microphone models only. Q‑sys page station rear panel refer to figure 3 . — fi...

  • Page 10

    10 mic/line in the page station rear panel includes an auxiliary mic/line input for support of a secondary microphone or other audio source. The mic/line accepts a euro style (phoenix) three-terminal plug, included in the page station package. Follow the page station rear panel pin-out labels figure...

  • Page 11

    11 npio connector the page station rear panel includes a six-terminal receptacle (figure 10, and figure 11) that provides various gpio (general purpose inputs and outputs) that allows the page station to control or be controlled by a variety of external products. The page station gpio receptacle acc...

  • Page 12

    12 required connections • lan-a — connect one end of a cat 5e cable with an rj45 connector to the lan-a connector on the page station. Connect the other end of the cable to the q-lan network. • connect lan-b in the same way if you are going to be using lan-b. When power is supplied to the page stati...

  • Page 13

    13 mounting the hand‑held microphone models note!: the product shall be installed in accordance with the applicable code requirements. The tripple-gang electrical box must be ul listed, and the dimensions must meet nema standards. Q-sys page stations are designed to be mounted on a wall or podium wi...

  • Page 14

    14 mounting the nooseneck microphone models there are two methods of mounting the gooseneck microphone page stations. You can mount the page station onto the mounting surface with the page station at a 30° angle to the mounting surface or into a podium or other surface so that the page station surfa...

  • Page 15: Specifications

    15 specifications hardware dimensions (h/w/d) line voltage requirements accessories included 10.37” x 8.3” x 1.5” (263.4 mm x 210.8 mm x 38.1 mm) ieee 802.3af power or +24 vdc/500 ma hardware user manual, accessory ship kit, warranty card audio channel capacity line inputs line outputs 2 1 front pan...

  • Page 16: Keypad Configurations

    16 keypad configurations the following keypads are available with both the hand-held, and gooseneck models. — figure 22 — — figure 23 — — figure 24 — — figure 25 —.

  • Page 17

    Contact mailing address qsc audio products, llc 1675 macarthur boulevard costa mesa, ca 92626-1468 u.S. Main number (714) 754-6175 world wide web www.Qscaudio.Com sales & marketing voice (714) 957-7100 international toll free (u.S. Only) (800) 854-4079 fax (714) 754-6174 e-mail info@qscaudio.Com sup...