QSC SR-1290 User Manual - Specifi Cations
7
TD-000447-00-B
Specifi cations
System Details
SR-1290
Frequency range (-10 dB)
1
50 – 20 kHz
Rated impedance
4
nominal
Rated noise power
2
400 W rms
Sensitivity
3
96 dB
Maximum continuous SPL
4
119 dB
Maximum peak SPL
4
125 dB
Recommended amplifi er power
800 W
Rated coverage angle (-6 dB)
90° conical (averaged from 1 kHz to 8 kHz)
DMT
LF transducer
12" woofer, paper cone, 2.5” voice-coil
HF transducer
Compression driver, 1” exit, 1.75” voice-coil, coaxial mounted
Input connector type
4-position barrier strip, , accepts up to #10 AWG stranded wire
Enclosure Details
Material
15 mm Baltic Birch Plywood
Grille
Black Cloth
Wall Mounting
Baffl e is 15° downward for wall-mounting install using QSC QM-SW or 23° using QSC QM-BW
Ceiling Mounting
Attachment points for ceiling install using third-party mounting brackets.
Safety
Tethering point for safety line
Finish
Non-refl ective black vinyl
Net weight
35 lb (16 kg)
Shipping weight
43 lb. / 19.5 kg
Product dimensions (H x W x D)
20.3" x 13.9" x 16.3" (516 mm x 353 mm x 415 mm)
Shipping dimensions (H x W x D)
23.6" x 15.7" x 18.1" (600 mm x 400 mm x 460 mm)
Optional Accessories
QM-SW, QM-BW, YM-400
1 Free-fi eld, -10 dB from on-axis sensitivity
2 AES2-1984 noise signal for 2 Hrs
3 On-Axis, free-fi eld sensitivity, 2.0V, 1 m
4 Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifi cations are subject to change without notice.