™ hardware installation guide tsc-7t – networked, table-mounted, 7” touchscreen controller td-000508-01 -a *td-000508-01 *.
2 td-000508 -01 -a explanation of symbols the term “warning!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term “caution!” indicates instructions regarding possible damage to physical equipment. If these instruct...
3 td-000508 -01 -a maintenance and repair warning!: advanced technology, e.G., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of addition...
4 td-000508 -01 -a introduction the q-sys tsc-7t series touchscreen controllers provide remote management services for a q-sys audio system. The functionality of the tsc-7t touchscreen controller is defi ned and confi gured by the system designer using q-sys designer. Refer to the q-sys designer on ...
5 td-000508 -01 -a tsc-7t rear panel features — figure 2 — lan a/poe lan b 12v dc reset 2 3 4 5 1 1. Usb 2.0 micro-ab otg interface 2. Q-sys lan a with poe (rj45) 3. Q-sys lan b (redundancy) (rj45) 4. 12v dc aux power input (power supply not included) 5. Unit reset button touchscreen tsc-7t packing ...
6 td-000508 -01 -a installation the q-sys tsc-7t is designed to be mounted on a table, or desk. General requirements the tsc-7t • must have access to the q-lan ethernet. • must be mounted with suffi cient space for adequate ventilation. • mounting surface thickness: • maximum – 4” (102 mm), • minimu...
7 td-000508 -01 -a through-the-table mounting 1. Drill a 33.3 mm (1-5/16 inch) hole through the mounting surface in the spot where you want to mount the tsc-7t. Refer to figure 6 2. Screw end with fewer threads on mounting pipe (1) into the bottom side of the base (2). Refer to figure 7 3. Run the c...
8 td-000508 -01 -a free-standing installation 1. Perform the steps in “prepare for installation (both options)” on page 6. Refer to figure 11 2. Remove the cable cover (2) from the tsc-7t (1). Refer to figure 12 3. Connect the cables to the proper connectors in the tsc-7t a. Lan a/poe - required for...
9 td-000508 -01 -a tsc-7t dimensions 198 mm 7.8 in. 119 mm 4.7 in 119 mm 4.7 in 127 mm 5.0 in. Tsc-7t specifi cations display lcd 7” projected capacitive touch (fi ve coordinate simultaneous touch sensitivity) luminance: 400 nits (400 lumen/candela per square meter) resolution: 800x400 rear panel co...
10 td-000508 -01 -a © 2014 qsc audio products, llc. All rights reserved. Qsc, the qsc logo, q-sys, the q-sys logo, and q-lan are trademarks of qsc audio products, llc in the u.S. And other countries. All other trademarks are the property of their respective owners. Http://patents.Qsc.Com. Mailing ad...
